Siemens SINAMICS G110M Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Промислове обладнання Siemens SINAMICS G110M. Siemens SINAMICS G110M 42 сторінки. Control of a g120 or g110m with an allen-bradley controller (compact/controllogix) via ethernet/ip

Друкувати сторінку
Siemens SINAMICS G110M Посібник

1 Introduction

Introduction
1
1.1

EtherNet/IP Overview

Industrial Ethernet communication networks continue to gain global importance in
automation solutions. Industrial Ethernet connectivity down to device level
components (i.e. drives, I/O, etc.) is an end user requirement that demands
openness and flexibility. To capitalize on the flexibility to connect to different
Industrial Ethernet protocols the SINAMICS G120 can seamlessly be applied in
PROFINET and EtherNet/IP networks.
1.2

SINAMICS G series Connectivity to EtherNet/IP

The SINAMICS drive family offers both PROFINET and EtherNet/IP software
stacks for the SINAMICS G series which is easily selected via a parameter setting
in the standard SINAMICS firmware.
The network IP address of the SINAMICS G drive can be set through the
STARTER software. With STARTER software installed on your computer you can
connect to the SINAMICS drive through PROFINET or EtherNet/IP.
The SINAMICS drives operate on unicast telegrams which reduces network traffic.
SINAMICS G drives have been certified by ODVA for EtherNet/IP conformance
testing and participated in the EtherNet/IP PlugFest. Siemens is a member of
ODVA with Vendor ID # 1251.
Figure 1-1
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076,
V4.0,
09/2018
5