Siemens SINAMICS G120P Інструкція з експлуатації Посібник з експлуатації - Сторінка 7

Safety information

1.1

Dangerous electrical voltage

Hazardous voltages are present when electrical equipment is in operation.

Severe personal injury or substantial material damage may result if these warnings are not

observed.

Only qualified personnel are permitted to work on or around the equipment.

These personnel must be thoroughly familiar with all the warnings and maintenance

procedures described in these operating instructions.

The successful and safe operation of this device is dependent on correct transport, proper

storage and installation, as well as careful operation and maintenance.

National safety guidelines must be observed.

Five safety rules

When carrying out any kind of work on electrical devices, the "five safety rules" according to

EN 50110 must always be observed:

1. Disconnect the system.

2. Protect against reconnection.

3. Make sure that the equipment is de-energized.

4. Ground and short-circuit.

5. Cover or enclose adjacent components that are still live.

Note

Use of copper cables for a UL-approved system

For a UL-approved system use 60/75°C copper conductors only.

dV/dt filter compact plus Voltage Peak Limiter

Operating Instructions, 11/2013, A5E32847614B AA

WARNING

DANGER