Siemens SINAMICS S120 Інженерний посібник - Сторінка 29

Переглянути онлайн або завантажити pdf Інженерний посібник для Промислове обладнання Siemens SINAMICS S120. Siemens SINAMICS S120 30 сторінок. Applications for cabinet modules, liquid-cooled
Також для Siemens SINAMICS S120: Посібник з експлуатації (20 сторінок), Початок роботи (32 сторінок), Посібник (41 сторінок), Короткий опис (22 сторінок), Посібник (43 сторінок), Інструкція з монтажу в шафах для морських приводів (28 сторінок), Посібник із застосування (34 сторінок), Посібник із застосування (46 сторінок), Інструкція з експлуатації Посібник з експлуатації (22 сторінок), Початок роботи (32 сторінок), Інструкція з експлуатації Посібник з експлуатації (21 сторінок), Посібник з введення в експлуатацію (20 сторінок)

Siemens SINAMICS S120 Інженерний посібник
2 Examples and tips
2.2

Operation on a generator

How can I estimate the relative line short-circuit power when directly operated on a
generator?
As the ohmic resistance of the generator when compared to the inductive resistance is
very low, it can be neglected for the calculation.
As a consequence, the calculation is only made with the relative subtransient reactance
of the generator ''
For a simplified calculation, the following applies for the generator impedance:
With the formulas used in Chapter
over for the line short-circuit power at connection point IPC as follows:
The relative short-circuit power at the connection point IPC is therefore:
How can I estimate the relative line short-circuit power when operated on a generator via a
matching transformer?
Also here, the relative subtransient reactance of the generator ''
For the calculation, the following applies for the generator impedance:
With the formula for the generator impedance and the other formulas used in Chapter
"1.3.4.3
Calculations", the short-circuit power at connection point IPC is as follows:
''
_
The relative short-circuit power at the connection point IPC is therefore:
Engineering manual S120 Booksize
Entry ID: 109808992,
V1.0,
.
''
%
=
in
''
__
''
%
=
in
=
+
04/2022
"1.3.4.3
Calculations", the formula can be switched
1.1
=
+
''
_
=
√ 3 ∙
1.1
+
''
_
=
√ 3 ∙
is required.
+
29