Cisco WS-X45-SUP6L-E Примітка щодо встановлення та налаштування - Сторінка 27
Переглянути онлайн або завантажити pdf Примітка щодо встановлення та налаштування для Перемикач Cisco WS-X45-SUP6L-E. Cisco WS-X45-SUP6L-E 28 сторінок.
Друкувати сторінкуUse a lint-free tissue soaked in 99 percent pure isopropyl alcohol to gently wipe the faceplate. Wait five
Step 1
seconds for the surfaces to dry, and repeat.
Remove any residual dust from the faceplate with clean, dry, oil-free compressed air.
Step 2
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Use a magnifying glass or inspection microscope to inspect the ferrule at an angle. Do not look directly
Step 3
into the aperture. Repeat the process if any contamination is detected.
The connectors used inside the system have been cleaned by the manufacturer and connected to the
adapters in the proper manner. The operation of the system should be error free if the customer provides
clean connectors on the application side, follows the previous directions, and follows these guidelines:
•
•
•
•
Related Documentation
For more detailed installation and configuration information, refer to the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-19334-02
Clean the connectors using either a CLETOP cassette cleaner (Type A for SC connectors and Type
B for MT-RJ connectors) or lens tissues before connecting to the adapters. Use pure alcohol to
remove contamination.
Do not clean the inside of the connector adapters.
Do not use force or quick movements when connecting the fiber-optic connectors in the adapters.
Cover the connectors and adapters to keep the inside of the adapters or the surface of the connectors
from getting dirty when you are not using the connectors or while you are cleaning the chassis.
Catalyst 4500 Series Installation Guide
Catalyst 4500 E-Series Switches Installation Guide
Catalyst 4500 Series Module Installation Guide
Regulatory Compliance and Safety Information for the Catalyst 4500 Series Switches
Software Configuration Guide
Command Reference
System Message Guide
10-Gigabit Ethernet X2 Transceiver Installation Note
10-Gigabit Ethernet Transceiver Modules Compatibility Matrix
Cisco SFP and SFP+ Transceiver Module Installation Notes
Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix
Inspection and Cleaning Procedures for Fiber-Optic Connections
Installation Notes for the Cisco TwinGig Converter Module
Installation and Configuration Note for the Cisco Catalyst 4500 E-Series Supervisor Engine 6L-E
Related Documentation
27