Samsung 32A600 Посібник користувача - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Samsung 32A600. Samsung 32A600 47 сторінок.

Connecting a PC via HDMI port

SST

HDMI Cable

OSD →

•

When connecting a PC using HDMI cable, you must set DP OUT mode to "HDMI: SST" on the OSD

menu. (OSD –

System

–

DP OUT

- HDMI:SST)

•

HDMI sources can only support "HDMI:SST" mode.

•

When this function is available, the following may occur: flashing screen or black screen, which

depends on the type of the previous device used and the quality of the cable used. Try to use a

Samsung branded cable, and visit the website of the graphics card manufacturer to check and

update its driver with the latest version.

•

A Samsung branded cable is recommended.

Monitor 1

Monitor 2

Screen A

DP Cable

HDMI:SST

When the MST function is not supported

Make sure that the cable is connected correctly and DP OUT mode is set correctly on the OSD

menu. Refer to

DP OUT (MST/SST) Function

Make sure that the graphics card can support the MST (Daisy Chain) function. To check this, visit

the website of the graphics card manufacturer.

HDMI sources can only support "HDMI: SST" mode. When DisplayPort Ver. is set to 1.1, DP OUT only

supports SST for the DP source.

Check and ensure the following setting: Right-click the Windows desktop → Click Screen

resolution (or click Display settings for Windows 10). Make sure that MST is enabled: Check if the

Multiple displays list is set to "Extend these displays". If a different value is set, change to "Extend

these displays".

Windows 7

Windows 10

Implementation.