Samsung 4003 Series Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Samsung 4003 Series. Samsung 4003 Series 35 сторінок. Samsung series 4/5 led tv
Також для Samsung 4003 Series: Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (49 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок)
Друкувати сторінку
Basic Features
Using Favorite Channels
(_
MENU iTr] _ Channel --_ Channel List --_ EN°'(°ERIZ_
Add to Favorite / Delete from Favorite
Set channels you watch frequently as
Favorites,
1. Select a channel and press the TOOLS
button,
2.
Add or delete a channel using the Add
to Favorite or Delete from Favorite
menu respectively,
How to Stop Auto Programming
1.
Press the ENTERIZ_ button.
2.
A message will ask Stop Auto Program? Select Yes by
pressing the _1or I_ button.
3.
Press the ENTERIZ_ button.
Editing channels
[_
MENU iTr] --_ Channel --_ Channel List --_ EN°)'°ERI__
Channel Name Edit
1.
Select a channel and press the TOOLS button,
2.
Edit the channel name using the Channel Name Edit
menu,
II
Channel Name Edit (analog channels only): Assign your
own channel name,
Other Features
[_
IMENurm _ Channel _ EN°'(°ERI__
Memorizing channels
(_
MENUE]] _ Channel --_ EN°)'°ERIZ_
Antenna
(Air / Cable) _
.................................
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i,e. an Air or a Cable system).
Auto Program
II
Air: Air antenna signal,
II
Cable: Cable antenna signal.
II
Auto: Air and Cable antenna.
NOTE
When selecting the Cable TV system: Selects the
cable system. STD, HRC and mRCidentify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
Clear Scrambled
Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20-30 minutes.
How to Stop Searching Scrambled
Channels
1.
Press the ENTERIZ_ button to select Stop.
2.
Press the _1 button to select Yes.
3.
Press the ENTERIZ_ button.
This function is only available in Cable mode.
2
English