Samsung 460UXN-UD2 Посібник із швидкого старту - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Монітор Samsung 460UXN-UD2. Samsung 460UXN-UD2 29 сторінок. Quick guide (korean)
Також для Samsung 460UXN-UD2: Посібник із швидкого старту (26 сторінок), (Короткий посібник для початківців (26 сторінок), Короткий посібник (корейською мовою) (24 сторінок)

SOURCE button [SOURCE]

Switches from PC mode to Video mode. Selects the input source that an

external device is connected to.

[PC] → [DVI] → [AV] → [Component] → [HDMI] → [MagicInfo]

Note

•

The BNC mode will not be activated on the UXN-2 model.

•

MagicInfo supports the UXN-2 model only.

PIP button

Push the PIP button to turn the PIP screen On / Off.

More than one PIP cannot overlap on screen as BNC and the component

use the same terminal.

•

PC : DVI / AV / Component / HDMI

•

BNC : DVI / AV / HDMI

•

DVI / AV : PC / BNC

•

Component : PC

•

HDMI : PC / BNC

Power button [

Use this button for turning the LCD Display on and off.

Brightness Sensor (Optional)

Automatically detects the surrounding brightness it accordingly.

Note

This function is activated only on the models equipped with an auto bright-

ness sensor.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding

power saving functions. For energy conservation, turn your LCD Display

OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Rear

Note

For detailed information concerning cable connections, refer to Connecting Cables under

Setup. The LCD Display 's configuration at the back may vary slightly depending on the LCD

Display model.

Introduction

]