Samsung 5003 Series Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Samsung 5003 Series. Samsung 5003 Series 2 сторінки. 5100 series 5
Також для Samsung 5003 Series: Посібник користувача (2 сторінок), Посібник користувача (35 сторінок), Посібник користувача (2 сторінок), Посібник користувача (49 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок), Посібник користувача (2 сторінок)
Друкувати сторінку
LED TV
user manual
Still image warning
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
Avoid displaying still images (such as jpeg picture files) or still image elements
specifications may be changed without notice.
(such as TV channel logos, panorama or 4:3 image format, stock or news bars at
screen bottom etc.) on the screen. Constant displaying of still pictures can cause
ghosting of LED screen, which will affect image quality. To reduce risk of this effect,
Important Warranty Information Regarding Television
please follow below recommendations:
Format Viewing
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format menu for
✎
Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of the
best possible match.
screen width to screen height) are primarily designed to display wide screen
• Reduce brightness and contrast values to minimum required to achieve desired
format full-motion video. The images displayed on them should primarily
picture quality, exceeded values may speed up the burnout process.
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature and the images are constantly moving. Displaying
Frequently use all TV features designed to reduce image retention and screen
stationary graphics and images on screen, such as the dark sidebars on
burnout, refer to proper user manual section for details.
non- expanded standard format television video and programming, should
be limited to no more than 5% of the total television viewing per week.
Securing the Installation Space
Additionally, viewing other stationary images and text such as stock market
crawls, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions.
Keep the required distances between the product and other objects (e.g. walls) to
Displaying stationary images that exceed the above guidelines can cause
ensure proper ventilation.
uneven aging of LED Displays that leave subtle, but permanent burned-in
Failing to do so may result in fire or a problem with the product due to an increase in
ghost images in the LED picture. To avoid this, vary the programming and
the internal temperature of the product.
images, and primarily display full screen moving images, not stationary
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics
patterns or dark bars. On LED models that offer picture sizing features, use
these controls to view different formats as a full screen picture. Be careful
only.
in the selection and duration of television formats you use for viewing.
• If you use parts provided by another manufacturer, it may result in a problem
Uneven LED aging as a result of format selection and use, as well as burned-
with the product or an injury due to the product falling.
in images, are not covered by your Samsung limited warranty.
✎
The appearance may differ depending on the product.
y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
✎
Be careful when you contact the TV because some parts can be somewhat hot.
Subject to the requirements, conditions, exclusions and limitations of the original
Installation with a stand.
Installation with a wall-mount.
Limited Warranty supplied with Samsung Electronics (SAMSUNG) products,
and the requirements, conditions, exclusions and limitations contained herein,
4inches
SAMSUNG will additionally provide Warranty Repair Service in the United States
4inches
on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG
4inches
4inches
products purchased in the United States, for the warranty period originally
specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG
Authorized Service Center. Along with this Statement and the Original
Limited Warranty Statement, a dated Bill of Sale as Proof of Purchase must be
presented to the Service Center. Transportation to and from the Service Center
is the responsibility of the purchaser. Conditions covered are limited only to
Contact SAMSUNG WORLD WIDE
manufacturing defects in material or workmanship, and only those encountered
If you have any questions or comments relating to Samsung products,
in normal use of the product. Exclusions include, but are not limited to, any
originally specified provisions for in-home or on-site services, minimum or
please contact the SAMSUNG customer care center.
maximum repair times, exchanges or replacements, accessories, options,
upgrades, or consumables.
Country
CANADA
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
Samsung Electronics
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
Canada Inc.
Address
2050 Derry Road West
– In Canada : 1-800-SAMSUNG
Mississauga, Ontario L5N 0B9
Canada
Customer Care
1-800-SAMSUNG (726-7864)
Center
www.samsung.com/ca/
support (English)
Web Site
www.samsung.com/ca_fr/
support (French)
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
-00
- 1 -
Remote Control
Turns the TV on and off.
Displays and selects the available video
sources.
Press to access channels directly.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to
Returns to the previous channel.
select channel '54-3' , press '54' , then press '-' and '3' .
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the channel list on the screen.
Displays the main on-screen menu.
Displays Media Play.
MEDIA.P
SLEEP
Shuts off the TV automatically after a preset
period of time.
Displays frequently used functions.
Displays information on the TV screen.
Moves the cursor, selects the onscreen menu items,
E
(Enter): Press this button to select or run
and changes the values seen on the TV's menu.
a focused item.
Returns to the previous menu.
Exit the menu.
Use these buttons according to the direction
on screen.
PIC
SIZE: Changes the picture size.
MTS: Changes a program's audio to stereo, mono, or
Use these buttons with a specific feature,
Separate Audio Program (SAP broadcast).
according to the directions on the TV's screen.
CC: Controls the caption decoder and
displays captions on the screen.
✎
The button names above may differ from the actual names.
✎
Some buttons on the remote control may not be available.
✎
This remote control has Braille points on the Power, Channel, Volume, and Enter buttons and can be used by visually impaired persons.
Display Modes (HDMI/DVI Input)
Installing batteries (Battery size: AAA)
Optimal resolution:4 series:1366 x 768@60Hz
Horizontal
Vertical Frequency
Pixel Clock
Sync Polarity
Mode
Resolution
Frequency (KHz)
(Hz)
Frequency (MHz)
(H / V)
640 x 350
31.469
70.086
25.175
+/-
IBM
720 x 400
31.469
70.087
28.322
-/+
640 x 480
35.000
66.667
30.240
-/-
MAC
832 x 624
49.726
74.551
57.284
-/-
640 x 480
31.469
59.940
25.175
-/-
✎
NOTE
640 x 480
37.861
72.809
31.500
-/-
•
Use the remote control within 23 feet from TV.
640 x 480
37.500
75.000
31.500
-/-
Bright light may affect the performance of the remote control.
•
800 x 600
37.879
60.317
40.000
+/+
Avoid use when nearby fluorescent lights or neon signs.
The Color and shape may vary depending on the model.
800 x 600
48.077
72.188
50.000
+/+
•
VESA DMT
800 x 600
46.875
75.000
49.500
+/+
1024 x 768
48.363
60.004
65.000
-/-
1024 x 768
56.476
70.069
75.000
-/-
1024 x 768
60.023
75.029
78.750
+/+
1280 x 720
45.000
60.000
74.250
+/+
1366 x 768
47.712
59.790
85.500
+/+
- 5 -
- 5 -
Important Safety Instructions
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
✎
✎
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
✎
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries
properly. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local
electrical supply.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's
plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
4inches
contact an authorized dealer or service center.
4inches
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
(especially when children, elderly, or disabled people will be left alone in the house).
✎
Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by
causing the insulation to deteriorate.
4inches
• Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do
so may lead to serious damage to your TV.
• Use only a properly grounded plug and wall outlet.
✎
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure
that the wall outlet and power plug are readily accessible.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
U.S.A
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as
Samsung Electronics
wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or
America, Inc.
erase the printing on the product.
85 Challenger Road
Ridgefield Park, NJ 07660
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or
equivalent type.
www.samsung.com/us/
support
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• Use care when touching the TV after it has been on for some time. Some parts can be warm to the touch.
- 2 -
Screen Fit: Displays the full image without any cut-off when your TV is
The On Screen Menus
inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) HD
signals.
Your TV has two kinds of menus, the Main menu and the various Tools menus.
✎
HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
The Main menu gives you access to most or all of the menu options available
(1920x1080) or 720p (1280x720) resolution.
on your TV. The Tools menus display a selected number of frequently used
✎
You can adjust and store settings for each external device you have
menu options that change depending on the screen you are viewing. A Tools
connected to an input on the TV. Picture Sizes available by Input
menu symbol (T) in the lower right side of the screen indicates that a Tools
Source are listed below:
menu is available.
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally. A
The Main menu has seven primary categories:
magnified or shrunk picture can be moved left, right, up, and down.
y Picture
y Input
y Sound
y Application
Input Source
ATV, AV, Component (480i, 480p)
y Channel
y Support
DTV (1080i, 1080p), Component (1080i,
y Setup
1080p), HDMI (720p, 1080i, 1080p)
To view the Main menu, press the
MENU
button on your remote. To view a
Tools menu, press the
TOOLS
button on your remote.
■ Digital Clean View (Off / Low / Medium / High / Auto) : If the broadcast signal
received by your TV is weak, you can activate the Digital Clean View feature to
✎
The menu options that appear in the Main menu depend on the Source
reduce any static and ghosting that may appear on the screen.
you have selected. For example, if you have selected the HDMI
✎
source, the Channel category will not appear. To see the Channel
When the signal is weak, try all the Digital Clean View options until the
category, you must first select TV in the Source List.
TV displays the best picture.
■ HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to
The Menu options are presented below, arranged by Main menu categories.
adjust the screen depth. Low make blacks look darker.
(
t )
A Tools button symbol
next to an option name indicates the
✎
Available only in HDMI mode (RGB signals).
option is also available in one of the Tools menus.
■ Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process
Picture Menu
film signals from all sources and adjusts the picture for optimum quality.
✎
Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
Mode t
■ Motion Lighting (Off / On): When on, the TV automatically dims the screen's
Select your preferred picture mode.
backlights when full brightness is not needed - for example when the TV is
✎
displaying dark scenes - to reduce power consumption. The backlights are
When your TV is connected to a PC, you can only select Entertain and Standard.
returned to full brightness when the TV displays bright scenes.
■ Dynamic: Brightens the screen. Suitable for a bright room.
Picture Off
■ Standard: Suitable for normal room brightness.
■ Movie: Darkens the screen, making it less glary. Suitable for watching movies in a
The screen is turned off but the sound remains on. Press any button except
darkened room.
the power key or volume button to turn on the screen.
■ Entertain: Sharpens the picture. Suitable for games.
Picture Reset
✎
Only available when the TV is connected to a PC.
■ Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
their factory defaults.
■ Backlight: Adjusts the brightness of the screen by adjusting the brightness of the
individual pixels.
Sound Menu
■ Contrast: Increases or decreases the contrast between dark and light areas of the
picture.
Mode t
■ Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.
■ Sharpness: Sharpens or dulls the edges of objects.
■ Standard: Selects the normal sound mode.
■ Color: Adjusts the color saturation. The higher the Color setting, the more intense
■ Music: Emphasizes music over voices.
the color. Low settings remove color and the picture becomes black, white, and gray.
■ Movie: Provides the best sound for movies.
■ Tint (G/R): Adjusts the amount of green and red in the picture. As you increase the
■ Clear Voice: Emphasizes voices over other sounds.
amount of green, the amount of red decreases and vice versa.
Equalizer
✎
When the TV is connected to a PC, you can only make changes to Backlight,
Contrast, Brightness, and Sharpness.
Available in Standard sound mode only.
■ Balance L/R: Adjusts the balance between the right and left speaker.
Picture Options
■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
✎
When the TV is connected to a PC, you can only make changes to the Color Tone,
loudness of specific bandwidth frequencies.
Size, and HDMI Black Level.
■ Reset: Resets the equalizer to its default settings.
■ Color Tone (Cool / Standard / Warm): Cool makes the picture bluer (cooler). Warm
Auto Volume
makes the picture redder (warmer).
✎
Warm is deactivated when the picture mode is set to Dynamic.
Automatically adjusts the volume level when you change video sources or
content so the level remains the same.
■ Size: Set the size and aspect ratio of the picture on the screen.
Speaker Select
Your cable box or satellite receiver may have its own set of screen sizes as well.
However, we highly recommend you use the TVs 16:9 mode most of the time.
If you are listening to the sound track of a broadcast or movie through an
16:9: Sets the picture to the 16:9 wide screen format.
external receiver, you may hear a sound echo caused by the difference in
Zoom1: Provides moderate magnification of the picture. Sides, top, and bottom are
decoding speed between the TV's speakers and the speakers attached to your
cut off.
audio receiver. If this occurs, set the TV to External Speaker.
Zoom2: Provides larger magnification of the picture. Sides, top, and bottom are cut off.
✎
When you set Speaker Select to External Speaker, the TV's speakers
Wide Fit: Enlarges the aspect ratio of the picture so the picture fits the entire screen.
are turned off. You will hear sound through the external speakers only.
4:3: Sets the picture to the old, 4:3 format and puts black or gray borders on the right
When you set Speaker Select to TV Speaker both the TV's speakers and
and left of the picture.
the external speakers are on. You will hear sound through both.
✎
Do not watch your TV in the 4:3 format for a long time. The borders displayed
✎
When Speaker Select is set to External Speaker, the
on the left, right, and center of the screen in 4:3 format may cause image
buttons will not operate and the sound settings will be limited.
retention (screen burn) which is not covered by the warranty.
✎
If there is no video signal, both the TV's speakers and the external
speakers will be mute.
- 6 -
Getting Started
Accessories
• Remote Control & Batteries (AAA x 2)
• Warranty Card / Regulatory Guide
• Owner's Instructions
Class II product: This symbol indicates that a safety
connection to electrical earth (ground) is not
required.
AC voltage: Rated voltage marked with this symbol is
AC voltage.
DC voltage: Rated voltage marked with this symbol is
Input Cables (Sold Separately)
DC voltage.
• Audio
• Component
Caution. Consult instructions for use: This symbol
• Composite (AV)
• Coaxial (RF)
instructs the user to consult the user manual for
further safety related information.
✎
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
Cable Plugs
HDMI
USB
Optical
Do not plug cables in upside down. Be sure to check the orientation
of the plug before plugging it in.
TV Controller
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control.
✎
The product color and shape may vary depending on the model.
✎
You cannot input the numbers by pressing the TV's controller.
✎
If you press it first, the control menu appears. You can select the function by pressing and holding the TV's controller.
✎
With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting the volume,
and switching the input source.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV's basic settings.
Press the
POWER
button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV
guides.
✎
Connecting the power cord and antenna. (refer to 'Connections')
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for
example, simultaneous translations of a program into foreign languages).
✎
You can only select a language from among the ones being broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■ Mono: Select for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Picture Size
■ Stereo: Select for channels that are broadcasting in stereo.
16:9, Zoom1, Zoom2, 4:3
■ SAP: Select to listen to the Separate Audio Program, which is usually a
16:9, Wide Fit, 4:3, Screen
foreign-language translation.
Fit
✎
Depending on the program being broadcast, you can listen to Mono,
Stereo or SAP.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital
audio signal when you connect the digital audio jack on the back of the TV to
a digital audio in jack on a receiver or home theater.
■ Audio Format: You can select the Digital Audio output (SPDIF) format. The
available Digital Audio output (SPDIF) format may differ depending on the
input source.
■ Audio Delay: Lets you correct timing mismatches between the audio track
and the video when you are watching the TV and listening to digital audio
output from the TV through an external device such as an AV receiver.
When you select Audio Delay, a slider appears. Use the left and right arrow
buttons to adjust the slider. Press ENTERE when done (0ms ~ 250ms).
Visually Impaired
(digital channels only)
Adds a verbal description to the main audio to help the visually impaired.
Dolby Digital Comp
Sets Dolby Digital compression mode.
HDMI Audio Format
You can select the HDMI Audio format. The available HDMI Audio format may
differ depending on the input source.
Sound Reset
■ Reset All: Resets all sound settings to the factory defaults.
Channel Menu
❑ Memorizing Channels
When you first set up your TV using Plug & Play, the TV memorized the
channels that were available over the air or through your cable system and
added them to the Channel List. The Antenna and Auto Program functions
described below let you re-run the channel memorization function without
having to re-run the Plug & Play procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you must
select your TV's signal source, Air (using an antenna) or Cable. Select Menu >
Channel > Antenna > Air or Cable. After you have selected the signal source,
go on to the Auto Program function.
✎
Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select Cable, you will see
only snow. You must select Air to see a picture.
Auto Program
The Auto Program function memorizes all channels that are available over the air
or through your cable system and adds them to the Channel List. If you are using a
cable or satellite box, you do not need to run the Auto Program function.
VOLUME
and
MUTE
Connections
• For the best picture and audio quality, connect digital devices using
an HDMI cable.
• Power Cord
• If you connect an external device to the TV that uses an older version
• Wall Mount Adapter (4EA)
of HDMI, the video and audio may not work. If this occurs, ask the
manufacturer of the device about the HDMI version and, if it is out of
• AC/DC Adapter
date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture
may not display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
• HDMI
• HDMI-DVI
Digital Audio System
Using an Optical
Ports/Jacks
Do not plug in opposite or wrong direction. It could
(Digital) Cable
damage the TV port.
R
R
AUDIO OUT
R-AUDIO-L
AV Device (3)
Using a Component
Cable (up to 1080p)
Using Audio/Video
Cables
Input Menu
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the
SOURCE
2. Select a desired external input source.
■ TV / AV / Component / HDMI1 / HDMI2/DVI
You can only choose external devices that are connected to the TV. In the
Source List, connected inputs are highlighted.
- 3 -
To start Auto Program, follow these steps:
❑ The Channel List Tools Menu t
1. Push MENUm → Channel → Auto Program → ENTERE on your remote. The
The Channel List Tools menu contains most of the functions you can use on the
Antenna Source screen appears.
All Channels, Added Channels, and Favorite Channels List screens. To view,
2. On the Antenna Source screen, select the source of your TV signal.
select a list screen, select a channel, and then press the
Air
■ Add / Delete: Delete a channel from or add a channel to the Added Channels list.
To delete channels from the Added Channels list, follow these steps:
If your TV is connected to an antenna choose Air, and then press ENTERE. The
1. Select one or more channels in the Added Channels list using the ▲/▼
TV will automatically start memorizing channels.
buttons and the Yellow Select button on your remote.
Cable
2. Press the
TOOLS
3. Select Delete in the Tools menu, and then press the ENTERE button.
If your TV is connected to a cable outlet, choose
Cable
, and then press
To add channels to the Added Channels list, follow these steps:
Go to Step 3.
ENTERE.
1. Select one or more channels in the All Channels list using the ▲/▼
Auto
buttons and the Yellow Select button on your remote.
2. Press the
TOOLS
3. Select Add in the Tools menu, and then press the ENTERE button.
If you choose
, and then press
, the TV will automatically
Auto
ENTERE
✎
All deleted channels will be shown on the All Channels list. You add
select the correct Antenna source. Go to Step 3.
channels back to the Added Channels list on the All Channels list.
3. On the Cable Type screen, use the ◀/▶/▲/▼ buttons to select the type of
✎
A gray-colored channel indicates the channel has been deleted from
digital and analog cable systems you have: STD, HRC, or IRC. Most systems are
the Added Channels list.
STD (Standard). When done, select Start, and then press ENTERE. The TV will
✎
The Add menu option only appears for deleted channels.
start memorizing channels.
■ Add to Favorite/Delete from Favorite: Lets you add channels to and delete
✎
Channel memorization can take up to 45 minutes, depending on your
channels from your Favorite Channels list.
cable system.
To add channels to the Favorite Channels list, follow these steps:
✎
Memorized channels are added to the Added Channels list. These are the
1. Select one or more channels in the All Channels list using the ▲/▼
channels you will see when you use the Channel buttons on your remote.
buttons and the Yellow Select button on your remote.
2. Press the
TOOLS
Clear Scrambled Channel
3. Select Add to Favorite in the Tools menu, and then press the ENTERE
button.
This function filters out scrambled channels after Auto Program is
To delete channels from the Favorite Channels list, follow these steps:
completed. This process may take up to 20~30 minutes.
1. Select one or more channels in the Favorite Channels list using the ▲/▼
buttons and the Yellow Select button on your remote.
✎
Press the ENTERE button to stop the Clear Scrambled Channel.
2. Press the
TOOLS
✎
This function is only available in Cable mode.
3. Select Delete from Favorite in the Tools menu, and then press the
ENTERE button.
❑ Managing Channels
■ Timer Viewing: You can schedule a channel to be displayed automatically at
a set time, even when you are watching another channel. You must set the
Channel List
current time first in the Time > Clock function to use Timer Viewing.
See your list of Added channels, Favorite channels, or channels you've
To schedule a channel, follow these steps:
scheduled for viewing. Add or delete Favorite channels, add or delete
1. Select a channel in the Added Channels list using the ▲/▼ buttons and
the Yellow Select button on your remote.
channels from the Added Channels list, schedule channels or programs for
2. Press the
TOOLS
viewing. Watch a channel by selecting the channel in the All Channels, Added
3. Select Timer Viewing in the Tools menu, and then press the ENTERE
Channels, or Favorite Channels screen, pressing the ▲ / ▼ buttons, and then
button. The Timer Viewing screen appears.
pressing the ENTERE button.
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
Channel List Screens icons are listed on the left side. Select an icon using the
buttons to change the entries. Where numbers are displayed, you can
also enter numbers directly using the number keypad on your remote.
▲
/
▼
buttons to view each list.
✎
If you select Everyday or Every Week, the date you select in the
All Channels: Shows all currently available channels including those
■
Date field becomes the start date for your scheduled viewing.
you deleted from the Added Channels list.
For Everyday, the TV will turn on every day, at the time you
Added Channels
Added Channels: Shows all
. These are the channels
selected, starting from that date. For Every Week, the TV will
■
that appear when you press the CH button.
turn on every week, on the same day of the week as the start
date you selected, at the time you selected, from that day on. If
■
*
Favorite Channels: Shows all favorite channels.
you select Once, the TV will turn on once, on the date and time
■
Programmed: Shows all channels and programs currently scheduled
you selected.
using Timer Viewing.
5. Press the ENTERE button on your remote when done.
✎
Remote control buttons active on the Channel List screen.
✎
Only Added Channels can be scheduled.
x
Green (Zoom): Enlarges or shrinks a channel number.
✎
Scheduled programs and channels are displayed in the Programmed
x
Yellow (Select): Move the cursor to a channel. Press the Yellow
List.
button to select the channel. A c mark appears. Repeat to
select additional channels. Then, open the Tools menu and
✎
When you select a digital channel, press the ▶ button to view the
apply a function to the channels you selected.
digital program list. If you highlight a program in the list, and then
x
T (Tools): Displays the Channel List Tools menu. (The Tools
press the ENTERE(Schedule) button, you set Timer Viewing for
menus may differ depending on the situation.)
that program directly.
✎
If you use a cable box or satellite box, you cannot use the Channel List
■ Channel Name Edit: Analog channels only. Lets you assign a name of up to
or the Channel List functions.
five characters to an analog channel. For example, Hist, Food, Golf, etc. This
makes it easier to find and select a channel .
Display Icons Used in the Channel List Screens
■ Select All: Select all the channels in the displayed channel list.
Icons
Meaning
■ Deselect All: Deselect all the selected displayed channels.
c
A selected channel.
✎
You can only select Deselect All when one or more channels are
selected.
*
A Favorite channel.
■ Auto Program: See Auto Program under Memorizing Channels.
)
A reserved program.
Programmed List (on the Channel List Screen)
(
A program currently being broadcast.
The Programmed list displays the channels and programs you have scheduled
for viewing using the Timer Viewing function. You can view, modify, or delete a
show you have scheduled using the functions on the Programmed List screen
Tools menu.
- 7 -
• For an HDMI to DVI cable connection, you must use the
HDMI IN 2
(DVI)
port.
• Connecting through the HDMI cable may not be supported
depending on the PC.
• If an HDMI to DVI cable is connected to the
HDMI IN 2 (DVI)
the audio does not work.
• For Set-top box connection using HDMI cable, we highly
recommend you to connect the
HDMI IN 1 (STB)
port.
Blu-ray player / DVD /
cable box / sat box
PC
AV Device (1)
Using an HDMI Cable or an
DVI OUT
HDMI OUT
Using an HDMI Cable
HDMI to DVI Cable. Use the
(up to 1080p)
PC speakers for audio.
OPTICAL
PC
Audio Device
TV Rear Panel
W
R
B
R G
Media Play
Using a USB Drive
W
R
B
G
COMPONENT OUT
P
R
P
B
Y
Blu-ray player
or
R
W
R Y
VHF/UHF
Antenna
ANT OUT
R
W
Y
AV Device (2)
Cable
AUDIO OUT
VIDEO OUT
R-AUDIO-L
VCR
How to use Edit Name
Edit Name lets you associate a device name to an input source, making it
easier to select a source. To access Edit Name, enter the Input menu, and
then select Edit Name. Select the name of the device from the drop down
next to the name of the input jack it is connected to. For example, if your
Blu-ray player is connected to HDMI 2, select Blu-ray player from the drop
down next to HDMI 2.
button.
✎
If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
cable, you should select PC mode in Edit Name.
✎
If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI
to DVI cable, you should select DVI PC mode in Edit Name.
✎
If you have connected an AV device to the HDMI IN 2 (DVI) port with
an HDMI to DVI cable, you should select DVI mode in Edit Name.
- 4 -
t
Programmed List Screen Tools Menu
■ Change Info: Change the scheduling information for a show or channel you
have scheduled.
TOOLS
button.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List
screen, and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you
want to change, and then press the
TOOLS
button. The Tools Menu
appears.
button on your remote. The Tools menu appears.
3. Select Change Info, and then press the ENTERE button. The Timer
Viewing screen appears.
4. Use the ◀/▶ buttons to move from entry field to entry field and the ▲/▼
buttons to change the entries. Where numbers are displayed, you can
also enter numbers directly using the number keypad on your remote.
button on your remote. The Tools menu appears.
5. Press the ENTERE button when done.
■ Cancel Schedules: Cancel a show or channel you have scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List screen,
and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you want to
cancel, and then press the
TOOLS
button. The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTERE button. The Cancel
Schedules screen appears.
4. Select OK, and then press the ENTERE button.
■ Information: Display the information for a show or channel you have scheduled.
You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the Channel List screen,
button on your remote. The Tools menu appears.
and then press the ENTERE button.
2. On the Programmed List screen, select the show or channel entry you want
information for, and then press the
TOOLS
button. The Tools Menu appears.
3. Select Information, and then press the ENTERE button. The Timer Viewing
Info screen appears.
4. Select Change Info, and then press the ENTERE button to change
button on your remote. The Tools menu appears.
information, or select Close, and then press the ENTERE button to close the
Information screen.
■ Select All / Deselect All: You can select or deselect all channels in the channel list.
❑ Other Channel Menu Functions
Channel Mode (Added Channels/Favorite Channels)
Lets you select the channel list displayed when you press the <CH>
(Channel) button on your remote. For example, if you select Favorite Channels,
button on your remote. The Tools menu appears.
you will only see Favorite channels when you press the <CH> button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is weak
or distorted, fine tune the channel manually.
✎
Select the channel, and then select Fine Tune.
✎
Fine tuned channels that have been saved are marked with an asterisk
"*" on the right-hand side of the channel number in the channel banner.
✎
To reset fine-tuning, select the channel, select Fine Tune, and then
select Reset on the Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For instructions, see
your Quick Start Guide.
Language
Set the menu language.
✎
Choose between English, Español, and Français.
❑ Setting the Time
Time
✎
The time you set will appear when you press the
INFO
button.
■ Clock: Set the clock so you can use the various timer features of the TV.
✎
If you disconnect the power cord, you have to set the clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTERE and select Auto or Manual, and then press ENTERE again.
If you selected Auto:
The TV will automatically download the correct time from a digital channel.
• Select Time Zone, and then press the ENTERE button. Use the▲/▼
buttons to select your Time Zone, and then press ENTERE.
• Select DST (Daylight Savings Time), and then press ENTERE. Select On
if you want to turn the DST adjustment on and off manually. Select Off to
turn off the DST adjustment. Press ENTERE when done.
✎
The DST and Time Zone functions are only available when the Clock
Mode is set to Auto.
- 8 -
port,