Epson 7800p - PowerLite XGA LCD Projector Інформаційний посібник про продукт - Сторінка 10

Переглянути онлайн або завантажити pdf Інформаційний посібник про продукт для Проектор Epson 7800p - PowerLite XGA LCD Projector. Epson 7800p - PowerLite XGA LCD Projector 22 сторінки. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Також для Epson 7800p - PowerLite XGA LCD Projector: Посібник користувача (42 сторінок), Посібник з експлуатації (36 сторінок), Швидке налаштування (2 сторінок), Запасні частини (1 сторінок), Посібник з експлуатації (47 сторінок), Посібник з монтажу (5 сторінок), Технічна специфікація (2 сторінок), Технічна довідка (7 сторінок), Бюлетень підтримки продукту (25 сторінок), Бюлетень підтримки продукту (22 сторінок), Бюлетень підтримки продукту (28 сторінок), Бюлетень підтримки продукту (41 сторінок), Бюлетень підтримки продукту (15 сторінок), Бюлетень підтримки продукту (22 сторінок)

Друкувати сторінку

Epson 7800p - PowerLite XGA LCD Projector Інформаційний посібник про продукт

Correcting Computer Images

If you've connected a

computer and the image

doesn't look right or fit

properly on the screen, press

the

button on the

Auto

remote control (or the

button on the

Auto/Enter

projector's control panel).

This automatically resets the projector's tracking, sync,

resolution, and position settings.

Note: You must be projecting an image for this button to have

any effect. The

button works only with computer images.

Auto

Also, make sure the correct

such as

—has been selected in the Setting menu.

Analog RGB

Alternatively, you can cycle through the input settings using

the corresponding source button (

control until you see your device.

If vertical stripes appear in the projected image and the

button doesn't correct the problem, hold down the

button on the projector's control panel while pressing either

the

or the

Tracking +

Tracking –

If the image appears fuzzy or flickers and the

doesn't correct the problem, hold down the

pressing either the

Sync +

Note: Also make sure you have selected the correct Computer or

BNC Input option in the Setting menu for your computer. See the

User's Guide for more information.

option—

Computer

BNC Input

) on the remote

Comp

BNC

Shift

button.

button

Auto

button while

Shift

button.

Sync –

Projecting Images Without a Screen

Even if you don't have a screen, you can project images onto

surfaces like blackboards and colored walls without loss of

image color. Your projector has a sensor that measures the

Auto

conditions of the projection surface and automatically adjusts

button

the colors and shading of your image. For example, if you're

projecting onto a surface near a window, your image appears

clear and well-defined rather than faint.

Making Initial Color Corrections

Press the

Wall Shot

either the remote control or the

projector's control panel while

projecting an image.

Wall Shot's status appears in

Auto

the upper right corner of your

screen. Then you see a sequence

of colors flash for approximately

five seconds while the sensor

measures the conditions of the

projection surface and adjusts

the image.

Note: If the status message indicates that Wall Shot is off, press the

button again to turn it on.

Wall Shot

When you turn off the projector, it stores the correction values

obtained by the last Wall Shot measurements. This is useful if

you're projecting against the same surface and under the same

conditions. To retrieve these corrections, just press the

button again while projecting an image.

Shot

Adjusting Color Corrections for a New

Surface

Follow these steps to adjust the correction values if you're

projecting on a new surface or in a new location:

1. Press the

projector while you're projecting an image. Wait for the

Wall Shot status screen.

2. Press the

Readjustment

You see a sequence of colors flash for about five seconds as

the projector adjusts the color correction values for the new

projection surface.

5/03

EPSON PowerLite 7800p Projector

button on

button on the remote control or

Wall Shot

button until you see

Wall Shot

on the status screen.

EPSON PowerLite 7800p Projector

Wall Shot ON

Wall

Wall Shot