Siemens XC1003-A Операція - Сторінка 11
Переглянути онлайн або завантажити pdf Операція для Блок управління Siemens XC1003-A. Siemens XC1003-A 28 сторінок. Extinguishing control unit
Також для Siemens XC1003-A: Операція (32 сторінок)
Друкувати сторінку
4
Structure and function
4.1
Indicators and operating elements
Building Technologies
Fire Safety & Security Products
This chapter describes the structure and function of the extinguishing control unit. It
provides an overview of what options are offered by the extinguishing control unit.
A more detailed description of the individual procedures is provided in the
"Operation" and "Maintenance" chapters.
The figure below represents the indicators and the operating elements of the
extinguishing control unit.
Fig. 2
Indicators and operating elements
The operating interface consists of the following elements:
Light emitting diodes (LEDs):
The red LEDs signify states "Fire alarm" (alarm detectors), "Activated"
(activation of extinguishing initiated), or "Released" (extinguishing activated).
The yellow LEDs signify system parts "Disabled" or in "Test mode" or "Fault".
Keys:
The keys are used for operating the extinguishing control unit and for entering
the access code to allow system operating (Access level 2 enabled).
Structure and function
11
A6V10099835_a_en
12.2007