Siemens XC1003-A Операція - Сторінка 22

Переглянути онлайн або завантажити pdf Операція для Блок управління Siemens XC1003-A. Siemens XC1003-A 28 сторінок. Extinguishing control unit
Також для Siemens XC1003-A: Операція (32 сторінок)

Друкувати сторінку

1. Trouble Shooting

Maintenance

6.1

Checking all optical and acoustic elements of the control unit

6.2

Testing the alarm horn

Building Technologies

Fire Safety & Security Products

Only a well-serviced extinguishing system is also functional in an emergency.

Therefore, carry out the recommended maintenance work on a regular basis or

have the work done by a service engineer. At all events, comply at all times with

local regulations.

Every three months visual inspections to be carried out:

Visually check the Manual release button.

–

Visually check the Emergency hold or abort button.

–

Visually check the cylinder bank.

–

Annually inspections of functions to be carried out:

Check the extinguishing agent storage (pressure or weight of the cylinders).

–

Check the optical and acoustic elements of the control unit (see § 6.1).

–

Check the alarm horn (see § 6.2).

–

Check the illuminated warning panel (see § 6.3).

–

Check all fire detectors in "Detector test" mode (see § 6.4).

–

Check manual release in "Detector test" mode (see § 6.4).

–

Check the battery (only possibly by a service engineer).

–

Check whether the optical and acoustic elements of the control unit function

correctly.

Proceed as follows:

1. Press the "Lamp test" key:

All LEDs light up and the buzzer sounds for approx. 5 seconds.

2. Check whether all LEDs light up and the buzzer sounds.

Check the alarm horn for correct function.

Proceed as follows:

1. Enable "Access level 2".

The LED "Operating access" lights up.

2. Press and hold the key "Digit 3" and press the "Lamp test" key:

The alarm horn is activated for 30 seconds.

3. Press the "Silence Re-sound Horn" or the "Lamp test" key:

The alarm horn is silenced before 30 seconds elapse.

A6V10099835_a_en

12.2007