Epson 826W - PowerLite WXGA LCD Projector Посібник для початківців - Сторінка 4

Друкувати сторінку

Epson 826W - PowerLite WXGA LCD Projector Посібник для початківців

note

Projector users or presenters

can end the message

broadcast at any time by

pressing the Esc button on

the projector or remote

control. The following

reminder is displayed in the

lower left corner of the

screen: [ESC]: Close

Message Broadcasting.

Once the Esc button is

pressed, the projector will

not receive broadcast

messages until it is restarted.

note

This screen shows an

example of Group View.

Your screen will look

different in Detail View.

Message Broadcasting

If a projector is already operating, the Message Broadcast will

interrupt the existing projection.

8. When you want to end the message display or slideshow, click

End

If you are broadcasting a series of slides, you may need to calculate

the end time. Multiply the number of slides by the Update

interval between slides, then add the number of minutes to the

start time.

If you do not click

End

are broadcasting a slideshow, it will repeat until you end it.

However, individual projector users or presenters can stop the

broadcast by pressing the

control. Once the

Esc

broadcast messages until it is restarted.

Broadcasting Automatically

You can use the Timer function in EMP Monitor to set up slideshows

or messages for automatic broadcasting.

1. Start EMP Monitor. You may see a screen like the following,

showing your registered projectors and groups:

2. Open the

menu and select

Tool

, the message will remain on the screen. If you

button on the projector or remote

Esc

button is pressed, the projector will not receive

Timer > Timer Settings