Siemens FX-C Інструкція з ремонту - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з ремонту для Пральна машина Siemens FX-C. Siemens FX-C 34 сторінки.

INSTALLATION

2.1

To ensure fault-free operation, the appliance must be aligned

precisely via the height-adjustable feet.

If the appliance is installed on a base, the appliance must be attached

with the attachment kit, mat. no. 493529 for reasons of safety.

If the appliance is built under, fit the VDE cover panel instead of the

cover plate (mat. no. 472560).

209_58300000115677_ara_en_f.doc – 26.03.08

2.2

The water connection (3/4 inch) requires a conventional water line

with a water pressure of at least 1 bar (1 at.) (when the tap is turned

on, the water flow rate must be more than 8 l/min.). If the water

pressure is more than 10 bar (10 at.), a pressure reducing valve must

be installed.

2.2.1

Warm water version (optional)

The warm water appliances feature 2 valves. The warm water

connection is red and may be connected to maximum 60 °C.

For connecting appliances with warm water inlet in one tap, it is

necessary to install the adapting-pipe Mt. No. 050871

Seite 5 von 34