Cisco 7931G - Unified IP Phone VoIP Посібник з адміністрування - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з адміністрування для IP-телефон Cisco 7931G - Unified IP Phone VoIP. Cisco 7931G - Unified IP Phone VoIP 12 сторінок. For cisco unified callmanager express 4.0
Також для Cisco 7931G - Unified IP Phone VoIP: Посібник користувача (20 сторінок), Посібник з адміністрування (10 сторінок), Посібник з адміністрування (17 сторінок), Посібник з адміністрування (20 сторінок), Інструкція з монтажу (4 сторінок), Посібник (30 сторінок), Короткий довідник (2 сторінок), Коротка довідкова картка (2 сторінок), Посібник користувача (15 сторінок)

Cisco Unified IP Phone Installation

2 The phone screen displays the Cisco Systems, Inc., logo screen.

3 These messages display as the phone starts:

4 The main phone screen displays:

If the phone successfully passes through these stages, it has started up properly. If the phone does not start

up properly, see the

Network Settings

If you are not using DHCP in your network, you must configure these network settings on the

Cisco Unified IP Phone after installing the phone on the network:

• IP address

• IP subnet information (subnet mask for IPv4 and subnet prefix length for IPv6)

• Default gateway IP address

• TFTP server IP address

You also may configure the domain name and the DNS server settings, if necessary.

Collect this information and see the instructions in

The security features protect against several threats, including threats to the identity of the phone and to data.

These features establish and maintain authenticated communication streams between the phone and the

Cisco Unified Communications Manager server, and digitally sign files before they are delivered.

For more information about the security features, see the

refer to Cisco Unified Communications Manager Security Guide.

• Verifying load (if the phone load does not match the load on the TFTP server). If this message

displays, the phone start up again and repeats steps 1 and 2 above. The phone also displays the

download progress and names of files it downloads and upgrades.

• Configuring IP.

• Updating the Trust List.

• Updating Locale.

• Configuring CM Unified List.

• Registering.

• Current date and time

• Primary directory number

• Additional directory numbers and speed dial numbers, if configured

• Softkeys

Startup

Problems.

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

Cisco Unified IP Phone Settings

Cisco Unified IP Phone Security

Network Settings

Features. Also,