Cisco 7936 - IP Conference Station VoIP Phone Посібник користувача системи - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача системи для IP-телефон Cisco 7936 - IP Conference Station VoIP Phone. Cisco 7936 - IP Conference Station VoIP Phone 36 сторінок. Ip phone conference station
Також для Cisco 7936 - IP Conference Station VoIP Phone: Посібник користувача системи (50 сторінок), Посібник з експлуатації телефону (49 сторінок), Посібник із швидкого старту (6 сторінок), Короткий довідник (2 сторінок)
Друкувати сторінку
Phone Button Templates
Table 43-3
Feature
Conference
Forward all
Hold
Line
Meet-Me conference
Message waiting
None
Redial
Privacy
Service URL
Speed-dial
BLF/SpeedDial
Transfer
Cisco Unified CallManager System Guide
43-16
Phone Button Feature Description (continued)
Description
Users can initiate an ad hoc conference and add participants by
pressing the Conference button. (Users can also use the Join softkey
to initiate an ad hoc conference.)
Only the person who initiates an ad hoc conference needs a conference
button. You must make sure that an ad hoc conference bridge device
is configured in Cisco Unified CallManager Administration for this
button to work. Refer to the
information.
Users press this button to forward all calls to the designated directory
number. Users can designate forward all in the Cisco Unified IP Phone
Configuration windows, or you can designate a forward all number for
each user in Cisco Unified CallManager Administration.
Users press this button to place an active call on hold. To retrieve a call
on hold, users press the flashing line button or lift the handset and
press the flashing line button for the call on hold. The caller on hold
receives a tone every 10 seconds to indicate the hold status or music
(if the Music On Hold feature is configured). The hold tone feature
requires no configuration to work.
Users press this button to dial a number or to answer an incoming call.
For this button to work, you must have added directory numbers on the
user phone.
When users press this button, they initiate a meet-me conference, and
they expect other invited users to dial in to the conference. Only the
person who initiates a meet-me conference needs a meet-me button.
You must make sure that a meet-me conference device is configured
in Cisco Unified CallManager Administration for this button to work.
Users press this button to connect to the voice-messaging system.
Use None to leave a button unassigned.
Users press this button to redial the last number that was dialed on the
Cisco Unified IP Phone. This feature requires no configuration to
work.
Users press this button to activate/deactivate privacy.
Users press this button to access a Cisco Unified IP Phone Service
such as personal fast dials, stock quotes, or weather.
Users press this button to speed dial a specified number. System
administrators can designate speed-dial numbers in Cisco Unified
CallManager Administration. Users can designate speed-dial numbers
in the Cisco Unified IP Phone User Options Menu.
Users monitor this button for the real-time status of the associated
directory number or SIP URI on those devices that support the
presence feature. Users press this button to dial the destination.
Users press this button to transfer an active call to another directory
number. This feature requires no configuration to work.
Chapter 43
Cisco Unified IP Phones
"Conference Bridges"
chapter for more
OL-14153-01