Cisco 7940G Посібник - Сторінка 5

Adjusting the Footstand / Handset Rest

Footstand - To change the angle at which your phone sits on your desktop, adjust the

footstand while pressing the footstand button.

Handset Rest - When you connect your phone, you might want to adjust the handset

rest to ensure that the receiver will not slip out of the cradle. See the table below for

instructions.

Set the handset aside and pull the square plastic tab from the handset rest.

Rotate the tab 180 degrees.

Slide the tab back into the handset rest. An extension protrudes from the top of the rotated

tab. Return the handset to the handset rest.

After your phone is connected to the network, your phone may require login infor-

mation prior to allowing you to make or receive calls. If this is the case, your phone

will display "Log In" on the second line of the screen of the phone. To log in to

your phone, use the numeric keypad to enter your 10-digit phone number, User ID,

or global extension number as provided by your service provider in the UID/Phone#

field. Then, use the teal colored scroll button to move the blinking cursor to the PIN

Code field. Do this by pressing the lower (down) half of the up-down scroll button.

Then, enter your PIN Code as provided by your system administrator. Unless you

have been otherwise notified, your PIN Code is often the last 4 digits of your phone

number or extension. After you have entered your all information press [Submit].

Your phone will then start the log in process.

Your phone system supports a number of third party headsets. Users are advised

to test a variety of headsets for performance for a few days prior to purchasing and

deploying large numbers of a given headset.