Samsung UD55E-S Посібник з швидкого налаштування
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Монітор Samsung UD55E-S. Samsung UD55E-S 2 сторінки.
Друкувати сторінку
Quick Setup Guide
UD55E-P UD55E-S
- The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Checking the Components
Contact the vendor where you purchased the product if any
components are missing.
Warranty card
Quick Setup Guide
(Not available in some
Regulatory guide
locations)
Batteries
MagicInfo Software
Power cord
(Not available in some
DVD
locations)
AV/Component
Remote Control
DP cable
adapter
Holder-Ring (4EA) /
AUDIO adapter
Screw (4EA)
BN68-07328J-00
External sensor KIT
1
2
3
4
5
Remote Control Sensor
1
Aim the remote control towards this spot on the LCD Display.
Light sensor
2
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
Power indicator
3
The power indicator will turn off when the product is turned on. It
will blink in power-saving mode.
4
POWER button
Use this button for turning the LCD Display on and off.
5
SOURCE button
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
Reverse Side
RS232C OUT
IR
OUT
CONTROL IN
Connects to MDC using an RS232C cable.
1
- For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
2
Receives the remote control signal via the external sensor board and
outputs the signal via LOOP OUT.
3
Supplies power to the external sensor board or receives the light sensor signal.
4
Connects to a PC using a DP cable.
5
Connects to a source device using an HDMI cable.
6
Connects to another product using a DP cable.
- To use old and new models together, first contact the dealer the
product was purchased from to check if they are compatible.
Troubleshooting Guide
Issues
Solutions
The screen keeps
Check the cable connection between the
switching on and off.
product and PC, and ensure the connection is
secure.
No Signal is displayed
Check that the product is connected correctly
on the screen.
with a cable.
POWER
Check that the device connected to the
product is powered on.
Not Optimum Mode is
This message is displayed when a signal
displayed.
from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
Check the cable connection to the product.
screen look distorted.
The screen is not clear.
Adjust Coarse and Fine.
The screen is blurry.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
Check that the resolution and frequency of the
unstable and shaky.
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or
screen settings if required by referring to the
ghost images left on the
Additional Information on the product menu
screen.
and the Standard Signal Mode Table.
RS232C OUT
RS232C OUT
RS232C OUT
RS232C OUT
RS232C IN
DVI IN
AV /
DP OUT
DP IN
HDMI IN 1
HDMI IN 2
(MAGIC INFO)
RGB IN
COMPONENT
(LOOPOUT)
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
7
MAGIC INFO: Use the (dedicated) DP-DVI cable when connecting a
network box (sold separately).
8
Connects to a source device using a D-SUB cable.
9
Connects to a source device using the AV/Component adapter.
0
Connects to the audio of a source device.
!
Receives sound from a PC via an audio cable.
@
Connects to MDC using a LAN cable.
#
Connect to a USB memory device.
Issues
Solutions
The screen is too bright.
Adjust Brightness and Contrast.
The screen is too dark.
Screen colour is
Go to Picture and adjust the Colour Space
inconsistent.
settings.
White does not really
Go to Picture and adjust the White Balance
look white.
settings.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does
Make sure that the batteries are correctly in
not work.
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
AUDIO
RJ45
OUT
USB
IN