Siemens dishwasher Інструкція з використання Посібник з використання - Сторінка 15

Друкувати сторінку

Siemens dishwasher Інструкція з використання Посібник з використання

Additional options

* depending on model

Additional options

buttons.

Express Wash

(VarioSpeed) *

The >>Express Wash<< function can

reduce the running time by approx. 20% to

50% depending on the selected rinse

programme. To obtain optimum cleaning

and drying results at a reduced running

time, water and energy consumption are

increased.

Half load *

If you have only a few items to wash (e.g.

glasses, cups, plates), you can switch to

"half load". This will save water, energy

and time. It is recommended to put a little

less detergent in the detergent dispenser

than for a full load.

Hygiene *

The temperature is increased during

the rinsing process. This increases the

hygiene status. This additional option

is ideal for cleaning e.g. chopping boards

and baby bottles.

IntensiveZone *

Perfect for a mixed load. You can wash

very soiled pots and pans in the lower

basket together with normally soiled

utensils in the upper basket. The spray

pressure in the lower basket is intensified,

the rinsing temperature is increased

slightly.

Extra drying

An increased temperature during the final

rinse and an extended drying phase mean

that even plastic parts dry well. There is a

slight increase in the energy consumption.

can be set with the

Washing the dishes

Programme data

The programme data (consumption

values) can be found in the summary

of instructions. This data refers to normal

conditions and the water hardness set

value 2. Different influencing factors such

as water temperature or mains pressure

may result in deviations.

Aqua sensor *

* depending on model

The Aqua sensor is an optical measuring

device (light barrier) which measures the

turbidity of the rinsing water.

The Aqua sensor is used according to the

programme. If the Aqua sensor is active,

"clean" rinsing water can be transferred to

the next rinse bath and water consumption

can be reduced by 3–6 litres. If the

turbidity is greater, the water is drained

and is replaced with fresh water. In the

automatic programmes the temperature

and running time can also be adjusted

to the degree of soiling.

Switching on the appliance

Turn on the tap fully.

Open the door.

Switch on ON/OFF switch

The display of the last selected

programme

flashes. This

programme remains selected unless

another programme is selected with

the button <

Press the Start button

Close the door.

The programme starts running.

or button >