Siemens SX Series Інструкція з експлуатації Посібник з експлуатації - Сторінка 20

Друкувати сторінку

Siemens SX Series Інструкція з експлуатації Посібник з експлуатації

Additional options

Programme selection

You can select a suitable programme

according to the type of utensils and

degree of soiling.

Information for test institutes

Test institutes receive the information for

comparability tests (e.g. according to

EN60436).

These are the conditions for conducting

the tests, however these are not the

results or consumption values.

Request by e-mail to:

[email protected]

The product number (E no.) and the

production number (FD) are required

which you can find on the rating plate

92 on the appliance door.

Additional options

o n a l

A d d i t i

* depending on model

Additional options can be set with

the buttons 8.

Express Wash/ Speed

E x p r e s s W a s h / S p e e d P e r f e c t ( V a r i o S p e e d )

Perfect/ (VarioSpeed) *

This function can reduce the running

time by approx. 20% to 50% depending

on the selected rinse programme. To

obtain optimum cleaning and drying

results at a reduced running time, water

and energy consumption are increased.

Intensive zone *

Perfect for a mixed load. You can wash

very soiled pots and pans in the lower

basket together with normally soiled

utensils in the upper basket. The spray

pressure in the lower basket is

intensified, the rinsing temperature is

increased slightly.

Hygiene *

The temperature is increased during the

cleaning process. This increases the

hygiene status. This additional option is

ideal for cleaning e.g. chopping boards

and baby bottles.

Half load *

H a l f l o a d

If you have only a few items to wash

(e.g. glasses, cups, plates), you can

switch to "half load". This will save

water, energy and time. It is

recommended to put a little less

detergent in the detergent dispenser

o p t i o n s

than for a full load.

Extra drying *

An increased temperature during the

final rinse and an extended drying

phase ensure that even plastic parts dry

better. There is a slight increase in the

energy consumption.

I n t e n s i v e z o n e

H y g i e n e

E x t r a d r y i n g