Siemens EH...MN SERIES Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Siemens EH...MN SERIES. Siemens EH...MN SERIES 20 сторінок.
Також для Siemens EH...MN SERIES: Інструкція з експлуатації (20 сторінок)

Друкувати сторінку

Siemens EH...MN SERIES Інструкція з експлуатації

Adding more cookware

Press the

symbol. The new pan will be detected and the

previously selected power level will be maintained.

Note: If the pan on the hotplate that is switched on is moved or

removed, the hob will perform an automatic search and the

previously selected power level will be maintained.

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

seconds. The

symbol lights up for 10 seconds. The range

is locked.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Restrictions when using

This function may be used for all hotplates, provided that the

other hotplate in the same group is not turned on. (See figure)

Otherwise, the

and

symbols will flash on the display of the

›

selected hotplate; then the power level

without the function being activated.

*URXS

Time programming function

This function may be used in two different ways:

to automatically switch off a hotplate.

■

as a timer.

■

Turning off a hotplate automatically

The zone turns off automatically once the selected time has

elapsed.

Programming the cooking time.

The hob must be switched on:

Select the hotplate and the desired power level.

Press the

symbol. The

up.

‹‹

is displayed on the time program function display. To

select another hotplate, press the

until the

indicator for the desired hotplate lights up.

symbol for approx. 4

is automatically set

*URXS

indicator on the hotplate lights

symbol several times

To deactivate

Set it to

in the programming zone.

‹

Return to using two hotplates

Select one of the two hotplates of the flexible zone and set to

Note: When a hob is switched off and later switched on again,

the flexible zone will again be used as two hotplates.

To deactivate: press and hold the

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

All of the relevant information on the automatic childproof lock

connection can be found in the Basic settings chapter.

Note: The Powerboost function can be activated in the flexible

zone when used as a single hotplate. In this case, place the

pan in the centre as shown in the Flexible zone section.

To activate

Select the power level

Press the programming panel located above the

The function has been activated.

To turn off

Press the programming panel located above the

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Within the next 10 seconds, select the desired cooking time

in the programming zone. The possible default setting is,

from left to right: 1, 2, 3, etc., up to 10 minutes.

symbol for approx.

@›

‹

symbol.