Siemens EH6 MK1 Series Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Siemens EH6 MK1 Series. Siemens EH6 MK1 Series 16 сторінок.

Друкувати сторінку

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Cooking guidelines

The table below contains some examples.

The cooking times depend on the power level, type, weight and

quality of the food. As such they are approximate.

Power levels influence the cooking results.

Melt

Chocolate, chocolate coating, butter, honey

Gelatine

Heating and warming

Stew (e.g., lentils)

Milk**

Sausages heated in water**

Defrosting and heating

Frozen spinach

Frozen goulash

Slow cooking, simmering

Potato pancakes

Fish

White sauces (e.g., bechamel)

Whipped sauces (e.g., Bearnaise, Hollandaise)

* Continue cooking without a lid

** Uncovered

symbol. The indicator above the

symbol until the indicator above the

Selecting the power level

The range must be switched on.

Press the

symbol of the desired hotplate. The

symbols light up in the display.

Within the next 10 seconds, slide a finger on the

programming panel until the desired power level lights up.

Changing the power level: select the hotplate and set the

desired level using the programming panel.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

Upon selecting a hotplate the

■

then proceed to be adjusted.

If no pan has been placed on the induction hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

Remove purées, creams and thick sauces from time to time, if

they get too hot.

Use power level 9 to begin cooking.

Ongoing cooking

setting

1-1.

1-2

1.-2.

3-4

2-3

4-5*

4 -5*

1-2

3-4

‹

and

in the programming panel.

‹

symbol is displayed. It may

Ongoing cooking time

in minutes

5-15 min

20-30 min

10-15 min

3-6 min

8-12 min