Siemens EH8 SB1 Series Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Siemens EH8 SB1 Series. Siemens EH8 SB1 Series 16 сторінок.
Також для Siemens EH8 SB1 Series: Інструкція з експлуатації (12 сторінок)

Друкувати сторінку

Control surfaces

Pressing a symbol activates its corresponding function.

The hotplates

Hotplate

Single hotplate

Grill zone

Resistive plate-warming zone*

* Turning on the hotplate: The corresponding indicator lights up.

Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Turning on and off

Use a correctly sized pan.

The hotplate turns on automatically when a pan the same size as its outer

edges is placed on it.

Press the

symbol. The indicator above the

symbol until the indicator above the

Notes

The settings will not change if several symbols are pressed at

■

the same time. This enables the programming zone to be

cleaned when food is spilt.

Always keep the control surfaces dry. Moisture can affect

■

proper functioning.

symbol.

Even when switched off, the

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

indicators and the selected power level will appear alternately.

Selecting the power level

The hob must be switched on.

Selecting the hotplate: Touch the programming panel for the

required hotplate.

Within the next 10 seconds, slide a finger on the

programming panel until the desired power level lights up.

Changing the power level

Slide your finger along the programming panel until the

required power level is displayed.

Switch off the hotplate

Select the required hotplate and power level

turns off and the residual heat indicator appears.

Note: If no pan has been placed on the induction hotplate, the

selected power level flashes. After a certain time, the hotplate

switches off.

light will remain on as long as

•

‹

. The hotplate

•