Siemens EH8 SP1 Series Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Siemens EH8 SP1 Series. Siemens EH8 SP1 Series 16 сторінок.

Flexible zone

This may be used as one complete hotplate or two individual
hotplates depending on the actual cooking needs.
Operation.
It consists of several independently controlled inductors. When
the zone is working, those inductors that are not covered by
cookware are automatically turned off.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
in the upper or lower part of the flexible zone, when the
cookware is smaller than 13 cm (see diagram)
or in one of the two halves of the flexible zone, when the
cookware is larger than 13 cm (see diagram).
‘ ! FP
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.

Consisting of two independent zones

The flexible zone can be used normally as two independent
hotplates.
How to activate
See "adjusting the hotplate" section.

Childproof lock

The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
4 seconds. The
symbol lights up for 10 seconds.
@
The range is locked.
To deactivate: press and hold the
4 seconds. The lock is now deactivated.
‘ FP
symbol for approx.
#
#
symbol for approx.

As one hotplate

To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
Selecting the hotplate: Touch the programming panel for the
1.
required hotplate.
Press the
þ
symbol. The
2.
hotplate has been activated.
Now select the required power level by sliding your finger
3.
over the programming panel for one of the two hotplates that
form part of the flexible hotplate. The power level lights up on
the indicators for both hotplates.
To change the power level: change the power level by sliding
4.
your finger over one of the two programming panels.
To add more cookware
Press the
þ
symbol. The indicator lights for approximately three
seconds during the search and detection of a new piece of
cookware.
To deactivate
Set to 0 on the programming panel.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the "Basic Settings" section.
þ
indicator lights up. The flexible
9