Epson BrightLink 697Ui Посібник з налаштування - Сторінка 33

Переглянути онлайн або завантажити pdf Посібник з налаштування для Проектор Epson BrightLink 697Ui. Epson BrightLink 697Ui 43 сторінки.

7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next

circle appears at the top of a new column.

Note: If you make a mistake, press the Esc button on the remote control to go back to the previous

circle. To restart the calibration process, press and hold the Esc button for 2 seconds.

8. Continue until all of the circles disappear.

Parent topic:

Calibrating for Finger Touch Interactivity

Finger touch calibration coordinates the position of your finger with the location of the cursor. Turn off the

other projector while performing touch calibration.

Make sure you have calibrated the pens, installed the Touch Unit, performed angle adjustment, and

turned on the Touch Unit before calibrating for finger touch interactivity.

Note: The BrightLink 685Wi and BrightLink 685Wi+ do not support finger touch.

Pen Calibration