Cisco 7970 Series Налаштування - Сторінка 7

Переглянути онлайн або завантажити pdf Налаштування для IP-телефон Cisco 7970 Series. Cisco 7970 Series 15 сторінок. Unified ip phone
Також для Cisco 7970 Series: Короткий довідник (2 сторінок), Посібник з експлуатації телефону (45 сторінок)

Chapter 3

Setting Up the Cisco IP Phone

Only trained and qualified personnel should be allowed to install, replace, or

Warning

service this equipment.

Ultimate disposal of this product should be handled according to all national

Warning

laws and regulations.

Warning

Do not work on the system or connect or disconnect cables during periods of

lightning activity.

To avoid electric shock, do not connect safety extra low voltage (SELV) circuits

Warning

to telephone network voltage (TNV) circuits. LAN ports contain SELV circuits,

and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45

connectors. Use caution when connecting cables.

Only use the proper Cisco approved external power supply. Reference the

Caution

installation manual provided with the phone.

The following warnings apply when you use an external power supply.

This product relies on the building's installation for short-circuit (overcurrent)

Warning

protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15 A

U.S. (240 VAC, 10 A international) is used on the phase conductors (all

current-carrying conductors).

The device is designed to work with TN power systems.

Warning

The plug-socket combination must be accessible at all times because it serves

as the main disconnecting device.

OL-4314-01

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

Before You Begin

3-7