Epson EasyMP Network Projection Посібник з експлуатації - Сторінка 37

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Проектор Epson EasyMP Network Projection. Epson EasyMP Network Projection 40 сторінок. Multimedia projector
Також для Epson EasyMP Network Projection: Посібник з експлуатації (47 сторінок), Інструкція з оновлення (4 сторінок), Посібник з експлуатації (50 сторінок), Посібник з експлуатації (50 сторінок), Посібник з експлуатації (47 сторінок), Посібник з експлуатації (50 сторінок), Посібник з експлуатації (48 сторінок), Посібник з експлуатації (47 сторінок)

Application lock function

You can use the application lock to prevent third parties from operating

the projectors using EasyMP Monitor and from changing settings

without authority. Opening and closing EasyMP Monitor and status

monitoring can still be carried out even when the application lock is

applied.

In addition, when a password has been set, the password must be

entered in order to cancel the application lock. This ensures that the

application lock can not be easily cancelled, and thus improves system

security.

Switching Application lock between enabled and

disabled

Procedure

Select "Application lock" from the Tool menu.

The application lock will be enabled and no operations will be possible

other than opening and closing EasyMP Monitor and disabling the

application lock.

Procedure

Select "Application unlock" from the Tool menu.

The password entry window will be displayed, so enter the

set password and then click "OK".

If no password has been set (default setting), click OK without

entering a password. It is recommended that you enter a

password in order to strengthen security.

The application lock will be cancelled and operations can be

carried out as normal.

Carry out the following operations while application lock is cancelled.

Procedure

Select "Environment setup" from the Tool menu.

The Environment setup window will be displayed.

Select "Change the application lock password".

Enter the password in both the "New password" and "New

password (confirm)" boxes and then click "OK".

The password can be up to 16 bytes in length. Single-byte

alphanumeric characters can be used.