Cisco 8841 Посібник користувача - Сторінка 12

Using Your Phone

You can interact with the features on your phone in several ways:

Softkeys, located below the screen, give you access to the function displayed on the screen above

the softkey. The softkeys change depending on what you are doing at the time. The More ... softkey

shows you that more functions are available.

Feature and line buttons, located on either side of the screen, give you access to phone features

and phone lines.

Feature buttons—Used for features such as Speed dial or Call pickup, and to view your status on

another line.

Line buttons—Used to answer a call or resume a held call. When not used for an active call, used

to initiate phone functions, such as the missed calls display.

Feature and line buttons illuminate to indicate status:

Green, steady LED—Active call or two-way intercom call

Green, flashing LED—Held call

Amber, steady LED—Privacy in use, one-way intercom call, or logged into a Hunt Group

Amber, flashing LED—Incoming call or reverting call

Red, steady LED—Remote line in use (shared line or Line Status) or Do Not Disturb (DND)

active

Red, flashing LED—Remote line on hold

A Busy Lamp field lets you see if colleagues' lines are free to take calls.

You can have up to 8 Busy Lamps on the Cisco 8841/8851 and 8861, all programmable through

the Horizon Portal. The line button is green if it's free, or red if it's not.

The Busy Lamp field also acts as a speed dial, letting you call your contact via a single button.

Page

Horizon

Cisco IP Phone 8841/8851 and 8861 User Guide