ACD GRUPPE F160 Короткий огляд - Сторінка 5
Переглянути онлайн або завантажити pdf Короткий огляд для Сенсорні термінали ACD GRUPPE F160. ACD GRUPPE F160 16 сторінок. Vehicle terminal
Друкувати сторінкуATTENTION
3.1 Switching the Device on and off
3.1.1 Switching on
In order to switch on the device, the ON/OFF switch at the bottom of the device must be in position "I"
(Figure 2). The device can then be switched on via a defined key (ACD key (default setting), F1 key or F2
key, see Figure 3). It is also possible that the device starts up immediately without pressing a defined key.
Figure 2: Switching on
Figure 3: Front of the Device
MFT920_F160_Fusion_Summit_Brief_Overview_FCC_V1.50_en.doc
Voltage may occur on the inside of the device, which may lead to
severe or even fatal injuries when touching live parts or handling
the device in an improper manner. It may also lead to severe
material damage.
The device may only be opened by trained specialists, and only
after consulting with ACD.
The device may only be attached in the position intended by the
holding bracket.
5 / 16