Digital Loggers Personal Call Recorder Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для телефонів Digital Loggers Personal Call Recorder. Digital Loggers Personal Call Recorder 10 сторінок. Automatically record calls on your pc
Також для Digital Loggers Personal Call Recorder: Посібник користувача (17 сторінок), Посібник користувача (16 сторінок)
Select a new folder and
click OK. Recordings are
grouped into daily sub-
folders like this:
Instant Replay
Select Show the Instant Replay Window from the View
menu to play calls. Select a call fi rst, then use the
shortcut buttons to control play, email, and export fi les.
Capturing Screen Shots
Personal logger provides a handy way of capturing the
information on your screen. For example, you may want
to save order information along with the call itself.
Press CTRL-SHIFT-S to capture the active window.
Press CTRL-ALT-S to capture the entire desktop.
Shortcut keystrokes may be changed. Captured screen
images are listed in the Instant Replay Window.
Right click on a screen shot to email it.
USB Personal Call Recorder
10
1
www.digital-loggers.com
Self-Help
I'm not getting any audio at all.
Check cabling fi rst. Note that two different sets of
cables come with the recorder. The smaller plugs are
only for handsets, and the larger connectors are only
for outside lines. They aren't interchangeable. Although
the smaller connector can be inserted in a larger jack, it
won't make a reliable connection. After you've checked
the connections, check to see that the AK5371 input is
enabled and selected for input. Most computers have
just recording device. All devices appear in the Recording
Device List. Select "AK5371" USB audio device in the
Windows control panel.
Cabling check OK, AK5371 selected, still no audio.
Use the "properties" tab to select recording devices.
Adjust recording levels in the Windows control panel
–and- using the black slider control. Make sure the
AK5371 MIC is not "muted" in the Windows control panel.
Cables are connected properly, AK5371 is selected,
but I don't get any audio or indication on the level
meter.
The most likely cause is that the audio input source
is turned off or muted. If you haven't used your logger
before, it may not be enabled. Use the control panel to
enable it. To open the control panel, double-click the
speaker icon, or use the shortcut below.
USB Personal Call Recorder
11