Cisco 8865NR Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для IP-телефон Cisco 8865NR. Cisco 8865NR 2 сторінки. Add buttons to your phone
Також для Cisco 8865NR: Посібник користувача (24 сторінок), Посібник (44 сторінок), Посібник (14 сторінок), Посібник (11 сторінок)
Друкувати сторінку
1
Your Phone
1
Incoming call or voicemail indicator
2
Camera (Cisco IP Phone 8845, 8865, and 8865NR)
3
Feature and session buttons
4
Softkeys
5
Back, Navigation cluster, and Release
6
Hold, Transfer, and Conference
7
Headset, Speakerphone, and Mute
8
Voicemail, Applications, and Directory
9
Volume
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Cisco IP Phone 8800 Series
9
8
Feature and Session Buttons
Use feature buttons (left side) to view calls on a line or
access features such as Speed Dial. Use session buttons
(right side) to perform tasks such as resuming a held call.
If you use a locale that reads right to left, the feature and
session button locations are swapped.
Buttons illuminate to indicate status:
Green, steady: Active call
x
Green, flashing: Held call
x
Amber, steady: Private line in use
x
Amber, flashing: Incoming call
x
Red, steady: Remote line in use
x
Red, flashing: Remote line on hold
x
Make a Call
2
Enter a number and pick up the handset.
Answer a Call
Press the flashing amber line button.
3
Put a Call on Hold
4
1. Press Hold
5
2. To resume a held call, press Hold again.
6
View Your Recent Calls
1. Press Applications
7
2. Select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again.
Add Another Person to a Call
1. From a connected call that is not on hold, press
2. Press Active calls to select a held call.
3. Press Conference again.
Quick Start Guide
.
.
Conference
.
.
October 2016