Cisco Catalyst 4000 Посібник для початківців - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник для початківців для IP-телефон Cisco Catalyst 4000. Cisco Catalyst 4000 31 сторінка. For cisco business edition 4000
Також для Cisco Catalyst 4000: Посібник (18 сторінок), Підготовка до встановлення (11 сторінок), Посібник із швидкого старту (8 сторінок), Посібник кінцевого користувача (6 сторінок), Посібник кінцевого користувача (6 сторінок)
Друкувати сторінку
use Lights-Out Management on the default (
Setting Up Lights-Out Management, page
Before You Begin
Obtain the restore ISO image for the appliance from the Support Site. See
Update Files, page
Reimaging a Firepower Management Center could cause an Out of Compliance (OOC) state with the Cisco
License Authority. As a best practice, when reimaging a Firepower Management Center, first deregister the
Firepower Management Center from the Cisco Smart Software Manager. Choose System > Licenses > Smart
Licenses and click the deregister icon.
To restore a Firepower device:
1.
Copy the image to an appropriate storage medium.
2.
Connect to the appliance.
3.
Reboot the appliance and invoke the restore utility.
What to Do Next
Install the ISO image using the procedure in
Obtaining the Restore ISO and Update Files
Cisco provides ISO images for restoring appliances to their original factory settings. Before you restore an
appliance, obtain the correct ISO image from the Support Site.
The ISO image you should use to restore an appliance depends on when Cisco introduced support for that
appliance model. Unless the ISO image was released with a minor version to accommodate a new appliance
model, ISO images are usually associated with major versions of the system software (for example, 5.2 or 5.3).
To avoid installing an incompatible version of the system, Cisco recommends that you always use the most recent
ISO image available for your appliance.
Firepower devices use an internal flash drive to boot the appliance so you can run the restore utility.
Cisco also recommends that you always run the latest version of the system software supported by your appliance.
After you restore an appliance to the latest supported major version, you should update its system software,
intrusion rules, and Vulnerability Database (VDB). For more information, see the release notes for the update you
want to apply, as well as the Firepower Management Center Configuration Guide.
For your convenience, you can install system software and intrusion rule updates as part of the restore process.
For example, you could restore a device to Version 6.0, and also update the device to Version 6.0.0.1 as part of
that process. Keep in mind that only Management Centers require rule updates.
To obtain the restore ISO and other update files:
1.
Using the user name and password for your support account, log into the Support Site
(https://sso.cisco.com/autho/forms/CDClogin.html).
2.
Browse to the software download section (https://software.cisco.com/download/navigator.html).
3.
Enter a search string in the
and install.
For example, to find software downloads for Firepower, you would enter
4.
Find the image (ISO image) that you want to download.
Cisco Firepower Management Center Getting Started Guide
24.
14.
Find
area on the page that appears for the system software you want to download
Restoring a Firepower Management Center to Factory Defaults
) management interface only. For more information, see
eth0
Beginning the Restore Process, page
Obtaining the Restore ISO and
15.
Firepower.
14