Ricoh Aficio 1050 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Принтер "Все в одному Ricoh Aficio 1050. Ricoh Aficio 1050 36 сторінок. Sap printing
Також для Ricoh Aficio 1050: Посібник (12 сторінок)
Друкувати сторінку
Bell105sysGB-FIN_FM.book Page 1 Wednesday, April 19, 2000 11:13 AM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations might be slightly different from your machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Operator Safety:
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains a
GaAIAs four beam laser diodes array, 10-milliwatt, 770-810 nanometer wavelength for each emitter.
Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety
precautions and interlock mechanisms have been designed to prevent any possible laser beam expo-
sure to the operator.
The following label is located on the internal cover that is revealed when the front cover is opened.
Laser Safety:
The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.
The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is
not repairable in the field. Customer engineers are therefore directed to return all chassis and laser sub-
systems to the factory or service depot when replacement of the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual. (For details, see ⇒ P.2 "Machine Types" )
•
Type 1 : D485
•
Type 2 : D4105
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Nashuatec recommends that you use genuine Nashuatec toner.
Nashuatec shall not be responsible for any damage or expense that might result from the use of parts
other than genuine Nashuatec parts in your Nashuatec office product.
Power Source
•
Type 1 : 220 - 240V, 50/60Hz, 10A or more
•
Type 2 : 220 - 240V, 50/60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see "Power Connection" of the "Copy Reference" manual.
Read this manual carefully before you use this product and keep it handy for future reference.
For safety, please follow the instructions in this manual.