Cisco Small Business SPA 301 Посібник з налаштування та усунення несправностей - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з налаштування та усунення несправностей для IP-телефон Cisco Small Business SPA 301. Cisco Small Business SPA 301 8 сторінок. Spa300 and spa500 series ip phone with cisco unified communications uc320w
Також для Cisco Small Business SPA 301: Посібник із швидкого старту (2 сторінок), Технічний паспорт (6 сторінок), Посібник користувача (18 сторінок), Посібник із швидкого старту (6 сторінок), Коротка довідкова картка (2 сторінок)

Phone.com Setup and Troubleshooting Guide

Cisco SPA301 1-Line IP Phone

Transfer (cont.)

Tip: Transfer calls directly to an extension's voicemail by dialing [*] and the extension number.

Do Not Disturb (DND)

You can prevent any calls from ringing your phone by enabling the DND feature. For instance, if you do

not want to be bothered during dinner, this is a useful feature.

1. Pick up your phone.

2. Dial [*][7][8] to activate DND.

3. The status indicator will slowly blink green and you will hear a slow "stutter" tone when you pick

up the phone.

4. To disable, dial [*][7][9].

Forwarding

You can forward any calls to another destination by enabling the forwarding feature. For example, this

might be convenient if you suddenly need to step away from your home or office phone, but still want to

receive your calls to your cell phone.

1. Pick up your phone.

2. Dial [*][7][2] to activate.

3. You will hear a high-pitched dial tone.

4. Enter the destination extension or number.

5. If your entry is accepted, the status indicator will slowly blink green and you will hear a slow

"stutter" tone when you pick up the phone.

6. Dial [*][7][3] to deactivate.

Call Blocking

Call Blocking allows you to block incoming calls from unwanted callers. Phone.com enables blocking

incoming calls from unknown numbers to a specific phone number in your account. The Call Blocking

feature also allows you to globally block incoming calls from a specific caller to all numbers in the

account.

1. Dial [*][9] to block a number while on the call. You will hear: "This caller has been blocked."

2. Upon disconnecting the call, that caller will not be able to call again.

4 / 8

Revised: 30 October 2012