Cisco SPA302D Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон Cisco SPA302D. Cisco SPA302D 38 сторінок. Mobility enhanced cordless handset
Також для Cisco SPA302D: Технічний паспорт (7 сторінок), Посібник користувача (10 сторінок), Посібник із швидкого старту (2 сторінок), Посібник користувача (49 сторінок)

Getting Started

Installing the Cisco SPA302D

STEP 7

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

Enter the PIN code (available from your phone system administrator). By default,

there is no PIN code. Press the Left softkey to confirm that you want to register the

handset. The "registering" message appears.

To verify that the handset registered to the base station, confirm that the DECT

signal strength icon is solid (not flashing) and that the handset ID, such as Handset

1 (or Handset 2), appears near the top right corner of the display screen.

Deregistering the Handset

To remove the association between the Cisco SPA302D handset and the Cisco

SPA232D base station, you must deregister the handset.

On the Cisco SPA302 handset, press the Select button in the center of the 4-way

navigation keypad.

Using the navigation arrow buttons, scroll to the Settings icon and press the

center Select button to select it.

Select Handset Registration.

Select Deregister.

Enter the PIN code (available from your phone system administrator). By default,

there is no PIN code; however, a PIN code may be set by your administrator to

prevent inadvertent deregistration of another handset. Press the Left softkey to

confirm.

A list of all handsets registered to the Cisco SPA232D appears. Choose your

handset from the list and press the center Select button. (Be sure to choose the

correct handset.)