Cisco SPA302D Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон Cisco SPA302D. Cisco SPA302D 10 сторінок. Mobility enhanced cordless handset
Також для Cisco SPA302D: Посібник користувача (38 сторінок), Технічний паспорт (7 сторінок), Посібник із швидкого старту (2 сторінок), Посібник користувача (49 сторінок)

5.0 Configuring Phone Settings

To reach the Settings menu, press the centre Select button, scroll to Settings, and press the Select button again.

In the Settings menu, press the arrow buttons to select the settings you want to change and press the Select

button. You can perform the following tasks:



Ringtones: There are 5 different ringtones and for private contacts the user can select a different melody



Tones: You can configure a tone to play when keys on the handset are pressed or when a phone call is

parked.



Backlight Settings: You can configure the amount of time that the handset display screen remains lit before

it is turned off to conserve battery power.



Date/Time: The handset date and time is synchronized with the Cisco SPA232D. You can also enter the date

and time manually from the handset.



Handset Settings: A unique handset name can be defined which is reflected in the upper right corner of the

display. The handset name is used to identify the SPA302D with the Intercom and handset deregistration.



Factory Reset: Performing a factory reset removes all of the information from your handset (for example,

contacts, speed dials, and call records) and restores it to the original factory software state. The Cisco

SPA302D remains registered to the Cisco SPA232D after a factory reset and must be manually deregistered.



Phone Info: Information can be viewed such as Software version, IP Address, MAC Address, etc.



Handset Registration and Update Software: this is described in detail below

If an extra SPA302D handset is purchased, it will need to be associated to the SPA232D base station.



On the Cisco SPA302D handset, press the Select button in the centre of the 4-way navigation keypad



Using the navigation arrow buttons, scroll to the Settings icon and select it.



Select Handset Registration.



Select Register.



On the Cisco SPA232D, press the Page/Registration button and hold it down for at least seven seconds until

the green status light flashes quickly.



Enter the PIN code. By default, there is no PIN code (leave it blank). Then press the left soft key to confirm

that you want to register the handset. The "registering" message appears.

Cisco SPA302D and SPA232D full user guide v1.0