Ricoh MP C3503 Посібник адміністратора - Сторінка 33

Переглянути онлайн або завантажити pdf Посібник адміністратора для Принтер Ricoh MP C3503. Ricoh MP C3503 48 сторінок. Envelope printing, setup & printing
Також для Ricoh MP C3503: Короткий посібник користувача (20 сторінок), Короткий посібник з копіювання (1 сторінок), Брошура та технічні характеристики (12 сторінок), Посібник користувача (36 сторінок), Посібник з налаштування функцій (5 сторінок), Посібник (44 сторінок), Тренувальна вправа (4 сторінок)

Tab

Interface Settings

2. Specifying [Facsimile Features]

The administrator must specify the settings in [Facsimile Features] within the ranges shown in the

following table.

For details about how to specify the settings, see "Facsimile Features", Fax.

• Prior to this, the administrator must register in the address book the users or groups whose access to

received faxes stored in the machine's memory is authorized. For details about registering data in

the address book, see "Registering Addresses and Users for Facsimile/Scanner Functions",

Connecting the Machine/ System Settings.

Tab

Reception Settings

Checking the MFP Settings

After completing the procedure described on page 12 "Specifying the MFP Settings", check the log data

and ROM version according to the following procedure.

You can check that the fax unit in use is a genuine product by checking that the entries in the log files

and the ROM version match the following:

Check that the machine is off.

Turn the machine on.

Check the details of the log files that were stored in this machine.

Check that the details for "Log Type", "Result", and "Module Name" in the recorded access log are

as follows:

Log Type: Firmware: Structure

Result: Succeeded

Item

Network

Effective Protocol

Firmware Update (IPv6)

Item

Stored Reception File User

Setting

Settings

[Inactive]

Settings

[On]

After setting this to [On], specify the users

or groups that can access stored

reception files.

Preparation for Use