Ricoh P7026N Технічний бюлетень - Сторінка 26
Переглянути онлайн або завантажити pdf Технічний бюлетень для Принтер Ricoh P7026N. Ricoh P7026N 46 сторінок.
Друкувати сторінку
Reissued: 05-Sep-01
Model:
Model K-P1
Firmware modified to correct the following:
1.
The spelling of the display for Job Interrupt in prnlog was changed from
"Cancelled" to "Canceled" to conform to Ricoh MIB (standards).
2.
Added the error message "Can not write NVRAM information". This message
appears if an error occurs when saving the printer status data to the NVRAM.
Firmware modified to correct the following:
1.
When 80000000(H) or higher is registered in the Manager IPX Address 2 in
the Web Status Monitor, the setting registered is changed to an unspecified
one.
2.
The NIB stops printing if several print jobs are continuously sent to the NIB via
the IPP port (SmartNetMonitor for Client), and a print job sent via the standard
IPP port may be canceled.
3.
The USTATUS data may sometimes be lost, depending on the timing of when
it is sent during bi-directional communication over TCP/IP port 9100.
4.
IP address 0.0.0.0 can be set with the ifconfig command.
5.
The spelling of the message for saving data at logoff was corrected from
"datas" to "data".
Change in Specification:
The length of the ID display for the prnlog command (telnet, rsh, and ftp) was
changed from 2 digits to 10 digits.
T
B
echnical
Descriptions
ulletin
Date:
15-May-01
PAGE: 2/2
No.:
RG058005a
Version
1.53
1.51