Ricoh P801 Інструкція - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція для Принтер Ricoh P801. Ricoh P801 5 сторінок. Electronic license system (els)
Також для Ricoh P801: Інструкція з експлуатації Посібник з експлуатації (12 сторінок), Посібник з налаштування (32 сторінок), Посібник з налаштування (32 сторінок)

Electronic License System (ELS)

P801 Printer Instructions

Another common area on the print head that gets dirty is the front edge of the heat sensor (in front of

print head, white part of the heat sensor, see Figures 3 & 4 below).

Use the same cleaning procedures as described above.

Clean front edge

Figure 3. Clean

If the print head is dirty, possible reasons are:

o Ink ribbon will not move correctly

o Ink ribbon will not move at all

o License roll will not move

o License will feed out half a license & stop

If the above occurs, the "green light" feed button will flash (fast).

Solution: Refer to cleaning instructions above.

Then you will need to:

Press the (fast flashing) "green light" feed button twice, quickly. The license roll paper will feed

and then stop. The (fast flashing) "green light" feed button will flash slowly. Press the feed button

once. It will begin printing (if there are no other setting problems).

If it flashes fast again....repeat above process.

If this does not fix this problem, the setting or parts (i.e. ribbon, paper paddle, silver rollers, etc) may not

be in its correct place.

Dirty front edge

Figure 4. Dirty

updated January 22, 2009