Ricoh PRO C9110 Прочитайте цей перший посібник - Сторінка 33

Переглянути онлайн або завантажити pdf Прочитайте цей перший посібник для Принтер Ricoh PRO C9110. Ricoh PRO C9110 40 сторінок.
Також для Ricoh PRO C9110: Примітки для користувачів (2 сторінок), Посібник з швидкого усунення несправностей (5 сторінок)

3. Other Information for This Machine

This chapter describes laws and regulations related to this machine.

Do not print any item for which reproduction is prohibited by law.

Printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its

completeness or accuracy. If you have any questions concerning the legality of printing certain items,

consult with your legal advisor.

This machine complies with the requirements of IEC60825-1:2007 (EN60825-1:2007) for class 1

laser product. The machine contains four VCSELs (Vertical Cavity Surface Emitting Laser), 772–792

nanometer wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees

(maximum) in the vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the

horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has

forty light sources and the maximum output power of each light source is 1.23 milliwatt.

Caution

Use of controls or adjustments or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Laser Safety for Media Identification Unit Type S3

Media Identification Unit (optional) complies with the requirements of IEC60825-1:2007

(EN60825-1:2007) for class 1 laser product. Media Identification Unit contains one VCSEL (Vertical

Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The beam divergence angle is 5.3

degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and 5.3 degrees (minimum)

and 7.9 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous

Wave (CW) mode. The VCSEL has twelve light sources and the maximum total output power is 2.5

milliwatt.

The following label is attached on the bottom of the machine.