Cisco Unified 7905G Посібник з експлуатації телефону - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з експлуатації телефону для IP-телефон Cisco Unified 7905G. Cisco Unified 7905G 46 сторінок. Ip talk series
Також для Cisco Unified 7905G: Посібник користувача (21 сторінок), Технічний паспорт (5 сторінок), Посібник користувача (25 сторінок), Короткий довідник (2 сторінок), Налаштування мережевих параметрів (34 сторінок), Посібник користувача (20 сторінок), Довідковий посібник (20 сторінок)

If you press End Call, you do not have to put the handset back in the cradle to end the call.

Note

When the handset in not in the cradle, the off-hook icon will appear on the screen although

there are no active calls.

Using the Speaker

The Cisco IP Phone 7905G and 7912G each provide a speaker for hands-free listening. You can use

the speaker only to listen to a call. To talk on a call, you must pick up the handset.

If you want to...

Listen to the other party on the

speaker

Listen to the other party using the

handset

Turn off the speaker and hang up

Adjust the volume on the speaker

If you system administrator has disabled the speaker on your phone, the Monitor and MonOff

Tip

softkeys will not be available to you. You must lift the handset to place and monitor calls.

Only one call can be active at any given time; all other connected calls must be placed on hold.

If you want to...

Put a call on hold

Remove a call from hold

Tips

• Engaging the Hold feature typically generates music or a beeping tone. For this reason, avoid

putting a conference call on hold.

Cisco IP Phone 7905G and 7912G for Cisco CallManager

Then...

Press Monitor and then hang up the handset. You will be able to

hear the call but you will not be able to talk on the call.

Lift the handset or press MonOff.

Press EndCall.

Press the up or down Volume button when the speaker is in use.

If you want to save the speaker volume setting, press Save.

Then...

Choose the call you want to put on hold and press Hold. The Hold

button will turn red and the caller ID information will flash on the

phone LCD screen.

Choose the call you want to remove from hold and press Resume.

The Hold button light will turn off.

Basic Call Handling