2. Safety Information for This Machine
1
2
1. Toothed rubber belt
2. Ink tubes
• Take care not to drop foreign objects inside the machine.
• After you install the ink cartridge and turn the machine on for the first time, the print head priming
process will begin. This process sometimes clogs the print head. If this happens, perform the head
cleaning procedure.
• During printing, do not turn off the power or unplug the power cord from the wall outlet.
• During printing, do not subject the machine to external shock.
• When not using the machine, turn off the power.
• You can place up to 10 kg (22.1 lb.) of evenly spread weight on the machine. Do not place any
concentrated weight of more than 2.5 kg (5.6 lb.) on the machine.
• Do not place unsteady objects on the machine. If they fall, they will cause injury to users and/or
damage to the machine.
• Depending on your printing document, the ink collector unit may fill up sooner than normal.
"Prepare new Ink Collector Unit" message appears shortly before the ink collector unit is full.
Although the machine remains usable until the unit is completely full, contact your sales or service
representative as early as possible (charge incurred).
• Ink cartridges should be used up before their expiry date, ideally within six months of being
removed from their packaging.
• Cartridges that are no longer usable for printing reserve a small quantity of ink for maintenance
usage.
• Ink cartridges and supplies comply with the manufacturer's safety specifications. To ensure safety
and reliability, use genuine print cartridges and supplies.
• Printing hundreds of copies in a single day might cause the print head to clog the following day. If
this happens, perform the head cleaning procedure.
• This machine performs regular automatic maintenance, after and during printing, to ensure
consistent print quality. Maintenance is also performed when printing begins after a period of
disuse.
14
DSA504
Друкувати сторінку