Ricoh Ri 1000 Посібник з усунення несправностей - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Принтер Ricoh Ri 1000. Ricoh Ri 1000 27 сторінок. Procedure for long-term storage
Також для Ricoh Ri 1000: Посібник користувача (9 сторінок), Посібник користувача з технічного обслуговування (7 сторінок), Посібник (22 сторінок)
Друкувати сторінку
Pausing.
Tap SET or EJECT button to start table
moving.
Pausing.
Tap STOP button to start printing.
Performing white ink circulation
Please wait
Printing
Receiving data
Right Ink Sump Full
Empty the box before reset the right ink
sump counter.
Right Ink Sump is nearly full
Printer will stop working when the box
comes to full
Roomtemperature is too high, it can
cause printing quality problem
Roomtemperature is too low, it can
cause printing quality problem
The temperature is too high
The temperature is too high. Able to
print.
The temperature is too low
Moving table is stopped
Printing is pausing.
While W1W2 circulation
table is moving
Machine is printing.
Receiving the Job data
Right Flushing Box is full
It is error status.
To recover, replace right ink sump
Right Flushing Box is nearly full
It is warning.
To recover, prepare to replace left ink sump
Room temperature is higher than 30.0 ℃
Room temperature is higher than 10.0 ℃
When it's in the operation state already, if the
temperature become high(more than approximately
40℃), it will occur.
It is necessary to do power off
When an operator make power on, but the
temperature is high(more than approximately 40℃).
After wait a moment, if the temperature is less than
40℃, printer will become active.
When it's in the operation state already, if the
temperature become low(below approximately 1℃), it
will occur.
It is necessary to do power off.