Ricoh SP C242 Series Посібник з оновлення прошивки - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з оновлення прошивки для Принтер Ricoh SP C242 Series. Ricoh SP C242 Series 14 сторінок.

Troubleshooting

This section provides solutions to common update-related problems.

If initialization does not end following a firmware update

If "Ready" does not appear on the machine's control panel after one minute

following a firmware update, a power failure or similar interruption prevented

the update from completing.

In this case, you will see the following screen on the machine's control panel.

❖

SP C240SF/C242SF

❖

SP C240DN/C242DN

Initializing

If this happens, read p.1 "Before Updating the Firmware" carefully again, and

then use the following procedure to recover from the failure and complete the

update.

• To be recovered following a failed update, the machine must be connected

to a computer by USB.

• When using a computer running on a Windows operating system, you must

have an account that has Manage Printers permission. Log on as an Admin-

istrators group member to acquire this permission.

• The screens shown in the following procedure are examples based on Win-

dows XP, unless otherwise stated.

If you performed the update through a network connection, disconnect

the network cable, and then connect the machine to your computer using

a USB cable.