Ricoh RZ-770 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера Ricoh RZ-770. Ricoh RZ-770 19 сторінок.

* If there is any dust on the inside lens surface, use a blower to blow the dust away.

3. Make sure the film stays within the Film Guides and lies flat. (Fig. 10,11)

4. Press the Back Cover shut so that the Back Cover Latch returns to its original position. The film is automatically

advanced until number "1" appears in the Film Counter. (Fig. 12)

5. If number 1 does not appear in the Film Counter, the film has not advanced properly. Reload the film by

following steps 1--4 shown above.

* The shutter will release even H the film has not been loaded properly. Therefore, make sure "1 " is displayed in

the Film Counter before shooting.

* Whether there is film in your camera or not can be confirmed by the Film Loaded Window. (Fig. 13)

* You can confirm that the Film-Wind or Rewind is working properly by observing the Exposure Counter.