Ricoh Aficio 2232C Технічний бюлетень - Сторінка 5
Переглянути онлайн або завантажити pdf Технічний бюлетень для Ксерокс. Ricoh Aficio 2232C. Ricoh Aficio 2232C 12 сторінок. Sap printing
Також для Ricoh Aficio 2232C: Технічні характеристики (2 сторінок), Специфікація (2 сторінок), Посібник (12 сторінок)
Друкувати сторінку
th
Updated: 30
Model:
Jupiter-C1
2. Copy Problems
Subject
Skew
Booklet finisher: The
edges of folded sheets are
not parallel (50–100mm
booklet skew)
3. Jam
Subject
Finisher
With series printing if the
jam
stapling positions for the
1st and 2nd jobs are
different and the 1st job is
set for stapling under
unsupported conditions
(e.g. only one sheet in the
stack).
Jam in the
duplex unit
Jam in the
The operator makes high-
fusing unit
volume print jobs on a
daily basis
The operator sometimes
makes high P/J print jobs
T
echnical
December 2007: Changes in bold italics
Symptom
RTB #
040
Symptom
RTB #
001a
024
041
B
ulletin
Date:
15-Sep-04
Cause
Grounding
Be careful during installation.
plate damaged
Repair or replace the
during
grounding plate.
installation
Cause
Engine
Install the latest engine
firmware
firmware (ver 1.11 or later)
Mylars not
Replace seven Mylars (P/N
installed
G3484682).
correctly.
See the RTB for the
Mylars not the
replacement procedure.
correct shape
The machine
Install the new Oil Supply
cannot supply
Unit. P/N: B1499500
enough fusing
Install only if ACV/APV is 15K
oil to the fusing
prints or more.
unit.
Do not install this unit if
operators use the machine at
normal print volume.
PAGE: 5/12
No.:
RB149000h
Solution
Solution
Note
Note