Ricoh Aficio MP C2050 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Ксерокс. Ricoh Aficio MP C2050. Ricoh Aficio MP C2050 41 сторінка. Papercut ricoh embedded manual
Також для Ricoh Aficio MP C2050: Специфікація (8 сторінок)
Друкувати сторінку
PaperCut – Ricoh Embedded Manual
2.2.5 Configuring the Enhanced External Charge Unit (SDK 4.x+ devices only)
When installing application "403046912" on an SDK version 4+ device, the "Enhanced
External Charge Unit" must be enabled. NOTE: This setting can only be enabled by a
Ricoh technician. We recommend that this setting be changed when the Java VM card is
installed. Please contact your copier dealer/technician to arrange this.
The system setting:
SP-5113-2 (Option Counter->External Option Counter)
must be set to:
1: Expansion Device 1
IMPORTANT: Also verify that SP-5113-1 (Default Optional Counter Type) is set to "0:
None". If set to another setting it will conflict with the SP-5113-2 setting and the copier will
not work as expected.
(The device may need to be restarted for these changes to take effect.)
2.2.6 Disable the Document Server
The document server MFP functionality can be used to re-print documents that will not be
charged to the user. For this reason the document server should be disabled via the SP
paramters by a Ricoh Technician. PaperCut plans to address this in an update to the
embedded software in Q1 2013).
To disable the document server, the following system setting must be changed:
SP-5967-1: Copier Server
must be set to:
1: Off
2.2.6.1 Ensure Device Authentication and Key Counter is Disabled
For PaperCut to work properly the built-in authentication (e.g. user codes) should be
disabled as follows:
1. Select the "User Tools/Counter" " hard key (on the top left of the device panel).
2. Select the "System Settings" button
3. Select the "Administrator Tools" tab
4. Select the "User Authentication Management" button (usually on the 2
options)
5. Disable the authentication by selecting the "Off" button.
The Key Counter can also interfere with PaperCut, so ensure that is also disabled:
1. Select the "User Tools/Counter" " hard key (on the top left of the device panel).
2. Select the "System Settings" button
3. Select the "Administrator Tools" tab
4. Select the "Key Counter Management" button (usually on the 2
Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved.
Revision: 19
2012-10-26
nd
page of
nd
page of options)
8 of 41