Cisco Webex 840S Посібник
Переглянути онлайн або завантажити pdf Посібник для IP-телефон Cisco Webex 840S. Cisco Webex 840S 12 сторінок. Wireless phone
Також для Cisco Webex 840S: Короткий довідник (3 сторінок), Посібник (36 сторінок), Короткий довідник (3 сторінок), Короткий довідник (3 сторінок)
Друкувати сторінку
Phone Setup
•
•
•
•
Phone Battery Installation
You must read the information in the Product Safety and Security chapter of the User Guide, before you install
or charge the battery, or use the phone.
Before you can use your phone, you must install and charge the battery. The battery may already be installed
in your phone, or you may have to install it yourself.
To maximize the battery storage capacity and lifespan, fully charge the battery before you turn on and set up
the phone.
Related Topics
Install the Battery
Don't install the battery in a dusty or wet environment.
The steps to install the battery are the same for both the Webex Wireless Phone 840 and Webex Wireless
Phone 860. However, the battery contacts are in different locations on these models, as shown in the following
illustration. The illustrations in the steps are of the Webex Wireless Phone 860.
Figure 1: Battery Contact Location on the Webex Wireless Phone 840 and Webex Wireless Phone 860
Phone Battery Installation, on page 1
Battery Contact Damage Prevention, on page 5
Phone Battery Charging, on page 6
Phone Configuration, on page 8
Product Safety and Security
Phone Setup
1