Cisco Webex 860 Налаштування - Сторінка 8

Переглянути онлайн або завантажити pdf Налаштування для IP-телефон Cisco Webex 860. Cisco Webex 860 10 сторінок.
Також для Cisco Webex 860: Короткий довідник (3 сторінок), Посібник з усунення несправностей (6 сторінок), Посібник (12 сторінок), Посібник (36 сторінок), Короткий довідник (3 сторінок)

Wi-Fi Profile Configuration

• Configure Cisco Phone

• Pair your Bluetooth

See

Settings

Wi-Fi Profile Configuration

For an out of box or factory reset phone, you configure the Wi-Fi network through the startup wizard or select

Set up offline. How you configure the phone offline depends on whether the Wi-Fi network is either:

• Broadcasted

• Nonbroadcast or hidden

Add the Phone to a Broadcasted Wi-Fi Network

You add the phone to a broadcasted Wi-Fi network through the startup wizard, or offline through the Settings

app.

Before you begin

You need the following information about the Wi-Fi network:

• Network name or Service Set Identifier (SSID)

• Network security mode (None, PSK, EAP-TLS, EAP-TTLS, or PEAP)

• PIN or passkey for the security mode, if you use one

Procedure

Step 1

Swipe up from the bottom of the phone's display to show the installed applications.

Step 2

Tap the Settings

Step 3

Select Network & internet > Wi-Fi.

Step 4

Tap the desired Wi-Fi network name.

If the network does not have a security mode, the phone automatically connects to the Wi-Fi network.

If the network security mode is PSK, enter the 8–63 ASCII or 64 Hex Passphrase.

Step 5

For an EAP-TLS, EAP-TTLS, or PEAP network, select the network EAP method: EAP-TLS, EAP-TTLS,

or PEAP.

Step 6

For a network with an EAP-TLS security mode, select the desired CA certificate and User certificate.

Check with your administrator for the certificate type to select and also arrange to install the certificates on

your phone.

Step 7

For a network with an EAP-TTLS or PEAP security mode, select the Phase 2 authentication method and

CA certificate option to use, and then enter the Identity and Password.

Phone Setup

app User settings, such as ringtones and automatic noise cancellation.

device to the phone.

for detailed directions.

app.

Phone Setup