Cisco Webex 860S Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для IP-телефон Cisco Webex 860S. Cisco Webex 860S 12 сторінок.
Також для Cisco Webex 860S: Налаштування (10 сторінок), Короткий довідник (3 сторінок), Посібник (36 сторінок), Короткий довідник (3 сторінок), Короткий довідник (3 сторінок)

Install the Battery

Warning

Take care not to damage the battery contacts within the handset when you remove the battery from the handset.

Take special care not to touch, compress, or come into contact with the battery contacts in any way or damage

may occur.

Warning

Use only the Cisco-branded batteries for this phone. If you attempt to use a third-party battery, you will receive

an error and the battery will not work. We don't support damage from attempting to use third-party batteries.

Procedure

Step 1

Locate the two battery tabs on the top edge of the battery.

Step 2

Locate the two slots in the wall at the top of the phone battery compartment.

Step 3

Position the battery at an angle approximately 45–60 degrees to the phone battery compartment.

Point the battery edge with the two plastic tabs toward the two slots in the battery compartment.

Phone Setup