Ricoh 4372-001 Посібник користувача - Сторінка 48

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для принтерів Ricoh 4372-001. Ricoh 4372-001 50 сторінок. Printer driver

Друкувати сторінку

Chapter 4 Various Settings of PostScript Driver

4.2

Printing on Custom Size Paper

Select [Printer] - [Paper Source] - [Paper Size] on the printer operation panel to configure custom paper size. And, select

[Printer] - [PostScript] - [Best Fit] to configure print condition for paper selection. Best Fit feature is effective when paper

size defined by application software is different from actual loaded paper in the printer. For information

about how to operate the printer control panel, see the "User's Guide" that came with the printer.

The diagrams (screens) used here give an example of Windows XP.

For Windows 2000:

Select [Start] - [Settings] - [Printers].

For Windows XP/Server 2003:

Select [Start] - [Control Panel] - [Printers and Faxes].

For Windows Vista/Server 2008:

Select [Start] - [Control Panel] and double-click on

[Printer] from [Control Panel].

For Windows 7/Server 2008 R2:

Select [Start] - [Control Panel] and

click the [Devices and Printers] icon from Control

Panel. If icons are not displayed, change [View by:]

on the right hand

side of the window from [Category] to [Large icons] or

[Small icons].

For Windows 2000/XP/Server 2003:

Select [File] - [Server Properties].

For Windows Vista/Server 2008:

Right-click on the printer list and select [Server

Properties]. When [Run as administrator] is displayed,

select [Run as administrator] - [Server Properties].

For Windows 7/Server 2008 R2:

Select Fax or Printer, click [Printer server properties].

On the [Forms] tab, select [Create a new form],

set the width and height, and click [Save Form].

For Windows Server 2008 R2, when

[Change Form Settings] is displayed,

click [Change Form Settings] and

check [Create a new form], set Width/Length and

click [Save Form].

Enter vertical direction from orientation of paper as

[width] and horizontal direction as [height]. Adjust the

width and height to match the paper size set on the

printer control panel. At this time, subtract the length

of feeding holes on both edges of the paper (1 inch =

25.4 mm). An example of setting is given below:

When the custom size paper created is added to the

paper list, the added custom size paper is displayed

on the printer driver under [Paper Size]. However, it

is displayed only when the size is within the range of

[Width] and [Height] of paper that can be used as

custom size. The range of [Width] and [Height] of

paper that can be used as custom size varies

depending on the printer. For more information,

see the User's Guide that came with the printer.

The following diagram shows an example of creating

a paper size of 15 x 8.5 inches without margins.

In the application software, specify the paper size

name that has been newly added. The newly added

paper size may not function properly depending on

the combination of application software and printer

driver. Test print and make sure that it can be properly

printed before using the newly added paper size.

4-4